2017-18 NCAA 13 rosters?

[This Is Michigan]

Is anyone doing rosters for the NCAA 13 game? I've been using current season rosters on that game for the last two years.

Got them from here. Would be great if someone did!

[lhinds7]

Re: 2017-18 NCAA 13 rosters?

I am interested as well

[jp18]

Re: 2017-18 NCAA 13 rosters?

That makes three of us, I cannot stand 14 anymore 13 is twice the game!

[This Is Michigan]

Re: 2017-18 NCAA 13 rosters?

Come on guys, pleaaase lol

[yauger27]

Re: 2017-18 NCAA 13 rosters?

I am also interested in this.

[pinbw]

HOW TO PORT NCAA 14's (2017-18) to NCAA 13 (& maybe12) Rosters

Well, I know many of the past year's seasons were made/ported/ & converted for NCAA 2013.
A while ago, for the first 4 years, The member Bob made port conversion of 2017,2016, 2015, 2014 seasons of Vikesfan rosters for PS3 NCAA 2013.
And the member Brock made the port/conversion of the 2016 season from "NCAA 2014 to NCAA 2012" for PS3 and converted it to Xbox. And then Another user (Sparky96) helped requested it to be ported to NCAA 2013 xb360. Link:

http://forums.operationsports.com/forums/ncaa-football-rosters/891037-searching-ncaa-football-12-2016-2017-rosters-5.html

Not sure if Bob or Brock can make another conversion port every year, if they have the time & don't think it's too much work.
If no one comes through here, theoretically, you guys could use last year's roster as a starting point and painstakingly create your own roster for this year's season (but if you have no time for that, I'd just check back here month to month). You can also make the port yourself if you know how..using NCAA Dynasty editor & PS3-Bruteforce & Xbox360-Modio3. (see my How To Port guide below!).
----------------
----------------
----------------
First updated 3/18
Recent Updated 10/23 & notes added in 2023:
HOW TO Port to NCAA13: [How To Port NCAA 14's Newest Rosters to Older Ncaa 13 game]
I figured out how you can make an NCAA 13 roster conversion!...Not a straightforward process, but it's possible by copying and pasting specific columns of data from NCAA 14 csv excel files to NCAA 13 csv excel files (eg.Players, Teams, and Coaches data).
Open Spoiler for Instructions with Precise Steps to Convert from a NCAA14 roster file!
(Valid for editing Xbox360 roster file contents or PS3 usr-data file.)
Required Editors/Programs:
NCAA Dynasty editor link>> https://forums.operationsports.com/f...editor-v1.html
(editor used to get into Roster files of PS3 and Xbox360 for all NCAA games)
(The ending .mc02 is required to re-label name of roster files for this editor)

Modio3 & generic EA Db Editor- (Modio3 for extracting Xbox360 roster from save files & using EA db editor for "only NCAA14 PS3" and Xbox360 roster files; EA db does not work correctly for NCAA 13 and older game rosters, so use NCAA Dynasty editor.)
Editor Download link>> Link or https://forums.operationsports.com/f...er-editor.html
(The ending .mc02 is optional to label name of roster files on EA db editor)

Bruteforce4.6 (for PS3 save files -decrypting/encrypting)
link>>https://digiex.net/threads/ps3-brute...ownload.13884/
(Usually the first step to get the source of all Rosters on this site-Vikesfan PS3 roster.)
(SEE Bruteforce notes below for problems on first time installing Bruteforce on a windows pc)

Spoiler

1-If you are getting the Roster from your own Console (Xbox/PS3):
You will need a Windows PC & the program, Modio (I use Modio3) to open a save file from an Xbox360 formatted flash drive with file saves; Roster should be loaded, then Extract File Contents file which is 1.36mb. And for PS3, use Bruteforce to open and decrypt the PS3 save file for accessing roster data file from a PS3 formatted flash drive. Open Spoiler for PS3 Save File instructions>>

Spoiler

PS3 requires to first open save file with Bruteforce; then use it to Decrypt the files; only then, they can be opened and edited. The USR-DATA is the PS3 roster file that can be edited directly with Dynasty Editor after adding .mc02 to the back of file name. After you are finished editing the PS3 files, you have to remove .mc02 endind & re-encrypt the PS3 save file.

2-You will need NCAA Dynasty Editor to open a Roster Contents file (1.36mb size) or PS3 USR-Data file; then you can extract Excel (csv file) Spread Sheets for Players, Teams, Coaches Files. Then using Microsoft Excel, copy data of "the common Column parameters" between NCAA 13 & 14. (Note: Ncaa 13 has 3 less teams than 14 in all 3 Files (players, teams, coaches ) and a few less Excell Column parameter features to copy.

**To open Roster file with Dynasty editor, add to the ending of file name ( .mc02). [To Open File with Dynasty Editor, For Xbox360 rosters just add .mc02 to name ending; For PS3, you must first decrypt Save file and then add .mc02 to USR-Data name ending, & finally open Userdata with Dynasty editor. ]

Using NCAA Dynasty Editor,
For Each NCAA 13 and NCAA 14 Roster files:
(Search for these rosters as an "offline file" from a recent Roster forum 2023, 2022, 2021, etc seasons.
Vikesfan2023-24
Vikesfan2022-23
Vikesfan2021-22
Vikesfan2020-21
Vikesfan2019-20
Vikesfan2018-19
Vikesfan2017-18
Xbox2017-18project
You will also need to have an NCAA 13 save file to paste/make all new save data to. You can either make it on your xbox360, or take an older offline file and overlap new data on top of it; However the total # of players have to be a matching number for edits to be made; The number of players in Bob's conversions have been 8455, so only this many players can be copied from NCAA 14, so the Game's final team players (UTSA) are not usually copied properly. This is the drawback of conversions if you are a fan of team UTSA.

3a- For the NCAA 14 roster you are planning to work with & port:
In Ncaa Dynasty editor,
You have to Export the Players data by using the Players TAB.(Go to File>Export Current Table to Excel csv file.) Also do this for Teams Tab. Also Export csv files for the "Base NCAA 13 files from Brock or Bob" for Players and Teams data so you can use them to paste/overlap and make them your new Players & Team csv files . Finally after editing/copying data, you have to use Dynasty editor & "IMPORT" csv files back into Roster file.
--------So to get started (you must work carefully and slowly)-------
Copy all the correct columns of data - I figured out exactly which columns to copy from NCAA 14 csv data files and paste them into NCAA 13 csv files. But it is important to not break EXCEL file structure; It's format should not be changed during the paste process.

Compare Excel files of NCAA 14 to NCAA 13 and just copy the columns that are the same. Note reason: 2014 game has 3 more teams & more features than 2013. So this will take a little patience not to add wrong data into the wrong columns in the NCAA 13 csv file.

3b.PRECISE STEPS to port "Players data csv": (with NCAA Dynasty Editor), (Valid for Xbox360 roster & PS3 )-NOTE: It is easiest to only port the Player Data without errors. But Porting all of the features of Teams and Coaches csv data may result in damaged roster errors or in game freezes. You may be able to port only some of the features of those files.eg. in Coaches data, just names of coaches,ages & in Teams file, just Team rankings, impact players, team captains and a few more columns.

-From NCAA 14 csv For each set of columns you copy, copy ROWS 1-8456 (the number of players recognized on 13 game may be 8455)
-COLUMNS TO COPY: PLAYERS FILE
i. Copy COLUMN A -to- AI from NCAA 14
and paste to COLUMN A-AI on NCAA 13 file
<SKIP copying Column AJ on NCAA 14 file>
ii.Copy COLUMN AK -to- CF from NCAA 14
and paste to NCAA 13 COLUMN AJ -to-CE on NCAA 13 file
<SKIP> Column CG on NCAA 14 file>
iii. Copy COLUMN CH -to- Final COLUMN EC on NCAA 14
and paste to COLUMN CF to EA on NCAA 13 file
END.
iv. SAVE PLAYER DATA CSV WORK. (Check over data to see if it looks right without any file structure wrong)
v. On Dynasty Editor, Import Current Table (your new PLAYER DATA) back into roster.
vi. Then use Modio to replace roster file back into your new roster save file ready to be used in XBOX 360.
(If you want Team Rankings updated, then do next step.)
--------------
4a-You can also Port TEAMS data (And edit Team rankings using the TEAM TAB (export data to Excel csv file - edit TCRK & TMRK -copy column BA & BB on NCAA 14 Team Excel_csv file and paste to AY & AZ on NCAA 13 Team Excel_csv file; note: If you are updating rankings week to week you only need to edit the top 25 or so teams since only those are visible on game)
-------------------------------------------------------------------
*If you decide to copy ALL Teams and Coaches data then continue with steps below.

4b. PRECISE STEPS to port "Teams data csv": (with NCAA Dynasty Editor),
Note:Not completely sure, but Porting Every Column data of Teams and Coaches csv data may result in damaged roster errors or in game freezes. You may only be able to port some of the Column features of those files eg. Rankings & Offense, Defense Team captains. So you may not want to copy "every column" of the Teams Data in instructions below (So YMMV as far as what data causes errors and freezes in game or in Dynasty.):
Update 9-10-2018: I recently found in Teams File there would be dynasty load up issues if you do not follow these instructions: CONFERENCE/Division Alignment needs to be unchanged and kept as default old NCAA 13 alignment.eg. Big10, C-USA, MWC have a few team differences between NCAA 14 & 13 game. Also some schools short name are labeled differently Army vs Army West Point, or Mich St. vs MSU.
***So I used Bob's old NCAA 2016 or 2017 season files as reference to Copy the Conference, and Division data exactly the same--COLUMN AD (CGID) & AE (DGID;

***Also found another requirement: Do not port second impact player from NCAA 14; So copy exact data from Bob's file COLUMN C(TSI2).--all values were 65535.

-From NCAA 14 csv For each set of columns you copy, copy ROWS of all Teams data that are same. So Copy Rows 2-129 (and skip 130 -132 and final HS teams). Basically, do not copy final 3 teams & the High school teams. A little tricky to copy and paste,but do it slowly.


In Excell I found F5 key allows a method to batch copy long lists of players easier.
eg. open in

Excell, CSV document and, Press F5. Type A2:AI8456 copy it from ncaa14 and paste into ncaa13.
(note: for NCAA 14,on Excel csv data files, you need to make sure there is not a first row with Play and PGID in A and B columns, otherwise delete this row.. Then do the copy and paste of correct rows and columns of players, so numbers match up the same between 14 and 13 csv files. This extra row is only present if you created NCAA14 csv files with EA db editor instead of NCAA Dynasty editor.)

Do this 2 more times for remaining conversion, "carefully".

Copy From AK2 -to- CF8456 from NCAA 14
& Paste to
AJ2 to CE8456, in Ncaa13

Finally, Copy From CH2 -to- Final COLUMN EC8456 on NCAA 14
& Paste to
CF2 to EA8456, in Ncaa13
(You don't need to use batch copy method for Teams and Coaches since lists are shorter)

-COLUMNS TO COPY: TEAMS FILE
i. Copy Columns A to J from NCAA 14
and paste to COLUMN A-J on NCAA 13 file
<SKIP Column K on NCAA 14 file>
ii. Copy Columns L(TLSA) to COLUMN Y(TMCC) from NCAA 14,
and paste to COLUMN K to X(TMCC) on NCAA 13 file
<SKIP Column Z on ncaa 14>
iii.Copy Columns AA to BO (TCAM) from NCAA 14,
and paste to Columns Y to BM (TCAM) on NCAA 13 file.
iv. Leave Column BN (TPTM) on NCAA 13 file alone-(note- this is not on NCAA 14)
v. Copy Columns BP (DISN) to CB (TMCP) from NCAA 14,
and paste to Columns BO -to- CA (TMCP) on NCAA 13 file.
<SKIP CC (TRCP) on NCAA 14>
vi. Copy CD to DN (TRST) from NCAA 14,
and paste to Columns CB to DL (TRST)
vii. Leave Column DM (TWTT) on NCAA 13 file alone-(note- this is not on NCAA 14)
viii. Copy Columns DO (PSAV) to Final Column EP (Tass),
and paste to Columns DN to EO (Tass).
End.
----------------------------------------------------------------
5. PRECISE STEPS to port "Coaches data csv": (with Dynasty Editor)-(9/15/23 I recently am just converting names and ages, and leaving the rest alone since Coaches face, hair and likeness were causing dynasty and game freeze issues)
*** -From NCAA 14 csv For each set of columns you copy, copy ROWS of all Teams data that are same.
So Copy Rows 2-385 (UTSA DC) (Dont Copy 3 Teams near end: GSU, ODU, and USA).
Copy Final ROWS 395 to 404 (SJSU Coach to Tul Coach)
and Paste in NCAA 13 file to rows 386 to 395.

ALSO USEFUL KEY definitions were made here: >>

https://forums.operationsports.com/forums/ncaa-football-rosters/642021-generic-editor-ncaa-14-a-29.html

COLUMNS TO COPY: COACHES FILE
<SKIP COLUMN A on NCAA 14 FILE--there is no CNNA>
i. Copy Columns B & C (CFFA and CLNA)
and paste to Colun A & B on NCAA 13 FILE
<SKIP COLUMN D on NCAA 14 --no CYRA>
ii.Copy Columns E-to-H (CDTA to CSPC)
and paste to Column C-to-F
<Skip Column I --no CARC>
iii. Copy Columns J-to-L (CFRC to CCTC)
and paste to Columns G-to-I
<Skip Column M --no CNTC>
iv. Copy Columns N-to-AR (CFUC to COTL) --(LONGEST # of COLUMNs ....YAY
and paste to Columns J-to-AN
<Skip Columns AS & AT (no CTTL & CRVL)>
NOTE: at the very end Overlap COLUMN L & M with an older NCAA 13 file data. use Bob's old NCAA 2016 or 2017 season COACHES file as reference to Copy the Conference, and Division data exactly the same--COLUMN L (CGID) & M (DGID; This was the same problem to be fixed on TEAMS DATA file.

v. Copy Columns AU-to-BO (CDEM to TNHS) --(next Longest # of Columns...YAY
and paste to Columns AO-to-BI (TNHS)
<Skip Column BP--no CCLS>
vi. Copy Columns BQ-to-BS (CLPS to CEQS)
and paste to Columns BJ-to-BL
<SKip Columns BT --no RCTS>
vii. Copy Columns BU-to-CO (CDTS to PHPV) --(3rd Longest # of Columns...YAY
and paste Columns BM-to-CG
<Skip Columns CP --no CNAW>
viii. Copy Columns CQ-to-CS (CBLW to PCTW)
and paste to COlumns CH-to-CJ
<Skip Column CT --no CHTW>
ix. Copy single Column CU (CNTW)--------maybe skip this step since all Zeros 0s
and paste to Column CK
<Skip Columns CV and CW --no CTTW and CRVW
x. Copy Columns CX-to end (CCBX to CTgw) --(4th longest # of Columns...YAY
and paste to Columns CL-to-CR

THE END!!

Note:
-You could port Depth Chart csv file, --but you can also decide to skip this step since Dynasty Editor does not transfer depth chart data properly.(I usually skip this file). Players are always in wrong position. You must adjust "in Game" manually, all teams depth charts for each team, 20+ Positions. Unfortunately, It will take a very long time on your part to go thru all teams and fix them. It will be worth it after you do it one time, so You can use the same file all year (in the editor) to overlap New Player Roster data on top of it through out the season.
-Note that porting Coaches and Teams data (some column feature data) in the past, was known to result in game/dynasty freezes (eg.Coaches file can cause loading issues; so it's safer to just copy and paste the coaches names & ages and maybe only a few other features at your own risk.
It was recently found to edit Coaches likeness features in Game for all teams giving problems, and then freeze issues in teams may go away.

TABLE OF COACH CODE KEYS>>https://forums.operationsports.com/f...&postcount=225
; So some of the feature tabs in the coaches CSV file were known to cause problems like freezes on teams, after copied from NCAA 14 to 13.)
**If you get a damaged roster error then you may have done something wrong and have to restart the editors all over & try importing again. Or maybe retrace/redo all your steps. So plenty of patience is needed doing the ports. But recently it was found to edit Coaches Likeness "in Game" first and then this fixes freeze issues.

-------------------------------------------------------------------
-Users Bob (& Brock) did all of this for the PS3 game in the past. (You can use their PS3/Xbox360 roster files as a base or comparison examples to work with when creating your new roster file. Bob has been doing this for a few years for NCAA 13(PS3only) while Brock did this for 12 and 13 last year (PS3 & Xbox360 conversion files. In 2017 & 2018, I began making ports for xbox360 & updates to PS3 port after the first version was made by Bob.)

Bob>>
NCAA 13: (PS3) 2014-15 Roster Conversion/Update
NCAA 13: (PS3) 2015-16 Roster Conversion/Update

http://forums.operationsports.com/forums/ncaa-football-rosters/885312-ncaa-13-ps3-2016-17-roster-conversion-update.html

http://forums.operationsports.com/forums/ncaa-football-rosters/913193-ncaa-13-ps3-2017-2018-roster-conversion-update.html

Brock>> http://forums.operationsports.com/fo...pdate-ps3.html

Me>>2023-24 Vikesfan, Jrriv4, Pinwiz Roster for Xbox360 & PS3, RPCS3 >>

https://forums.operationsports.com/forums/ncaa-football-rosters/1014503-ncaa-football-13-2023-2024-roster-conversion-update-xbox360-ps3-rpcs3.html

2022-23 Vikesfan, PinwizRoster for Xbox360 & PS3, RPCS3 >>NEW https://forums.operationsports.com/f...post2050649558

2021-22 Vikesfan, Jrriv4, Pinwiz Roster for Xbox360 & PS3>>
https://forums.operationsports.com/forums/ncaa-football-rosters/991727-ncaa-13-2021-2022-football-roster-conversion-update-xbox360-ps3.html#post2050449329

2020-21 Vikesfan, Packers, Pinwiz Roster for Xbox360 & PS3>>

https://forums.operationsports.com/forums/ncaa-football-rosters/972045-ncaa-13-xbox360-ps3-2020-2021-roster-conversion-update.html#post2050140728

2019-20 Vikesfan WIP Roster for Xbox360 & PS3>>

https://forums.operationsports.com/forums/ncaa-football-rosters/955435-ncaa-13-xbox360-ps3-2019-2020-roster-conversion-update.html

>> NCAA 13 (Xbox360 & PS3) 2018-19 Season Conversion WIP
>>NCAA 13: (Xbox360 & PS3) 2017-18 Roster Conversion/Update
Both the PS3 and Xbox360 data files can be edited similarly with the Dynasty editor.
-------------------------------------
Bruteforce Notes:

*The first time using PS3 roster file, you may have problems with using BruteForce (since I couldn't get into it the first time).
-I found you are required to have installed on your Windows PC:

Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (x86 version only; 64bit version does not fix the problems)
(otherwise you will not be able to decrypt save files)
-Brute force also has an error on first time startup without the file "msvbvm50.dll"--so google for this and watch youtube vids to fix this.

-I also found that You have to use PS3 Bruteforce program to open "one save file at a time" and then decrypt it and then you have to re-encrypt it after you are all done so the PS3 save file can be used in the console. (it takes trial & error to get used to using Bruteforce program, but you will eventually get it..)
-------------------------------------

**Some of the problems you have to live with in 13 are (UAB will have UNC Charlotte's players.
& All teams are not in their new conferences; game freezes on startup for some teams: Tex State and UMass; UTSA is missing a lot of player data; some teams have problems maybe related to face edits eg. IL and Mizz had problems in past but ok now.)
-So Some player features, skin tones,& faces may be buggy & cause game to freeze on startup.-In NCAA dynasty editor this problem might be related to the player values under columns "PGHE" in extracted CSV excel files --so these values may cause freezes if copied from NCAA 14 to lower NCAA games--esp NCAA 7 thru 12. NCAA 13 may only freeze for some teams. - A possible remedy is to use face values from a working roster & then fix your favorite team's player faces manually in game, but this has not been attempted or solved yet.

Coaches data -face or hair values probably cause game freeze problems, since It was found you can remedy freeze issues after going thru teams that freeze and edit their coaches likeness "in game".

-Finally you may have to reorder the depth charts before playing the rosters.
(All ps3 to xbox360 conversions or vise versa will have Depth chart problems so "manual" adjusting all positions "in game" is required & will take a long time on your part. Auto reorder of depth charts sometimes makes things worse, so manual adjustment is required.)
-Dynasty may freeze for some teams eg. Western Michigan and UMass.
-------------------
-------------------
First looked at 3/23/18:
Update revisited 10/18
How to Port to NCAA 12: game requires a little more tricky process but may be possible:
Open spoiler for NCAA 12 port info:

Spoiler

-Will be Tricky since Each team only has 68 players, while teams in NCAA 13/14 teams have 69 players. Total number of players recognized in 12 game is 8162 based on Brocks NCAA 12 port (8160 on a default roster-120 teams with 68 players). So after porting players from NCAA 14/13 to NCAA 12, you are not supposed to exceed total of 8162 or else game freezes.
NOTE: NCAA 14 has 3 more teams than NCAA 13, and NCAA 13 has 3 more teams than NCAA 12. So NCAA 14 has 6 more teams than NCAA12. Start off by Omitting the players from extra teams when porting.
UPDATE 2018: I found what needs to be done when copying/ pasting 69 players from NCAA 14/13 to make 68 player roster for NCAA 12. open Spoiler

Spoiler

NCAA 12 has a total of 8162 players, consisting of 120 teams. 118 teams have 68 players on each team and atleast 2 teams have 1 extra player (for 69 player).
Eg. In Brock's NCAA 12_2016 roster, 2 teams had 69 player roster while the remaining teams had 68 players;
(eg. TGID 47,58 or Maryland,&Nebraska had 69 players)
So it's possible to copy and paste teams from any NCAA 13/14 roster, then delete 1 player from each team to have 68 players (except the 2 teams noted above).

Other thoughts & ideas, before getting started making the ports--open spoiler

Spoiler

-Maybe we can create extra players within the game or with the Ncaa Dynasty editor for certain teams to match the NCAA 13/14 roster file, but unsure if this will cause freezes to the game);
Update 7/18: The process of determining extra player to delete ended up being a tedious/confusing process ; and some of the data copied and pasted from NCAA 14/13 was causing "rating " problems in NCAA 12.

-Just copy Players & Team & Coaches Names/Age Spreadsheet data that are the same from the 14/13 game into the 12 game; Copy the precise Excel CSV Columns and Rows of Data that are the same in NCAA 12 & 14/13 game. Brocks file had 2 teams with 69 players while the rest had 68 players. In order to match total player count at 8162, We may either remove the worst player from each team, or make some of the worst or least important teams have much less players to allow all the important teams have a full 69 player roster, but not sure if this will cause freezes or errors.

UPDATE1- In Excel CSV file ,specific data to copy: In Brock's NCAA 12 roster file & I recently found Spreadsheet "Columns" data is identical between NCAA 13 and 12 for the PLAYERs CSV file data & nearly identical for Teams csv data. You just have to determine which "extra Players" to omit from NCAA 13/14 to match total of 8162 player rows of spread sheet data found in NCAA12. (10/2018: I Just noticed Brock omitted the 69th player on each team(excepth Maryland & Nebraska since they had 69 spots); regardless of how good that player was on each team the 69th was removed--but atleast it was a playable roster. So I will try this next using Brocks working file as Base.)

To get started When copying from NCAA 13, omit all players from Umass, Texas State, and UTSA (these were the 3 extra teams not found in NCAA 12), and then delete the extra player from all teams to get the player count to match while allowing 2 teams (Maryland & Nebraska) to have 69 players. So it may be possible to port this using NCAA13 roster data & Brock's NCAA12 file as a base to work with. However, The total number of players needs to be 8162, so a player from each team needs to be omited from NCAA 14/13. One strategy of deleting a player is to remove the worst rated one from each team; There may be other strategies to have more players than 68 on each team while removing more on others, but just maintain total player count of 8162. eg.More teams with 69 player teams to match the player count from NCAA 13/14, but not sure if errors or freezes will occur;

>>See update1 about Excel Data. I found Spreadsheet "columns" are the same Between NCAA 13 and 12 so this makes it all possible to make the port. But it will still have the same minor problems needing manual fixing and skin tones etc other things may be wrong-things mentioned by Brock during his Port. Update final: I tried porting but found ratings were extremely low on most players, so a terrible port resulted.
**PRECISE STEPS of copy & paste in Excel csv files
So use Players & Teams data from NCAA13port CSV files to make NCAA 12 CSV file; The hard part will be to determine which players to omit from various teams in order to reach a total of 8162 players. So Porting to NCAA 12 will require a good strategy to remove a player from each team on NCAA 14/13.
Update 9-2018: I recently found in Teams File, CONFERENCE & Division Alignment needs to be checked/adjusted for many teams to default old NCAA 12 game.eg. Big10, C-USA, MWC have a few team differences in NCAA 14 & 12 game. Also some schools are labeled differently Army vs Army West Point.

When Copying data from NCAA 13
*In Teams CSV file---omit Umass, Texas State, and UTSA (Row 124, 126, 129) (So copy rows 1-123 exactly the same; ALL COLUMNS ARE IDENTICAL between NCAA 12 and 13 EXCEPT Column AC (TCID) from NCAA 13.
*In Players CSV file---omit players from Umass, Texas State, and UTSA (AC column is team id TGID, so omit players with AC 181, 218, and 232.
(If porting from NCAA 14, then 3 additional teams needed to be omitted: Georgia St, Old Dominion, South Alabama AC 233, 234, 235)
ALL COLUMNS ARE IDENTICAL between NCAA 12 and 13; but the difficulty is found here: Number of Rows of player data does not match Brocks Base file roster of 8163. It will be a slow process to figure out which players to keep and which to omit.
(update final: I managed to omit a player from teams A-M and uploaded a copy in link below. I may attempt to atleast complete the remaining teams N-W if get time and feel bored, but I have stopped for now.)

-If you managed to get the above roster process ported, then the next problem would likely be Depth charts needing manual adjustment, since they are not compatible due to different number of players & teams between ncaa 12 & 14/13. I also found ratings are not being ported properly resulting in too many low rated players on all teams.
-Note: Other things you may have to do in the port is fix Skintones, faces in Players data; In teams data you have to port the team's preseason rankings (step4 above), update team impact players manually, & upate Coaches names &ages. -Brock did all of this last year.
The Team data codes for these are as follows: OCAP and DCAP Offensive & Defensive Team Captains;TSI1, TSI2, TMPI,TPIO are 4 impact players-but data will not be same as NCAA 13,14 since players are numbered differently in NCAA12 and must do manually; TCRK & TMRK are team rankings to adjust the poll and may be partially copied from NCAA 14.

Update REVISITED 10/2018: After looking over the last conversion for 2016 season, I see now that every 69th player was removed during the conversions, so this resulted in a loss of one good player depending on their rating. So I will try this method of copy and pasting into the 2016 file & see if the players can be transferred from my NCAA 13 2018-19 season succesfully & playable.--I will worry about recovering the 69th player later--maybe I will try to determine the worst player on each team and paste over that player the 69th player to recover it that way...(this will be a small side project to try in OCT 2018.)

UPDATE 7/2018: -I had to give up again on NCAA 12 port since game freezes, but uploaded the files I did; (a very poor port with teams A-M, since I couldn't figure out how to make it work with proper ratings.)>>https://forums.operationsports.com/forums/showpost.php?p=2049277498&postcount=26

--So all of the above is possible to port NCAA 14 Vikesfan's newest eg. 2017-18 roster or port jrriv4's Xbox360 2017/2018 project roster to the 13 game and maybe 12 game. I tried doing all of the above but had problems freezes on the way. I put this Guide out here in case anyone else wants to attempt it themselves. They will need patience & time going though all the steps above & hopefully can get it to work.
**I don't really need these ports since I usually only play the 14 game. But with this Guide, someone who only has 12 or 13 now knows what is involved in porting rosters from 14 to 13 or even12 and they can attempt it themself.

Update8/17: I've had 12, but just recently purchased 13 in case someone makes this, so I 'm still interested in this).
UPDATE: I am ready to share an untested roster file I attempted porting for Xbox360 (sorry not experienced with PS3 save file decrypting/encrypting). I Will post soon next pos....
UPDATE 2: File loads up fine for casual play, but Dynasty freezes the game. But an attempt was recently made to fix it. So it may work now without freezes. The VikesfanPS3 roster freezing was fixed with by Bob, and I converted it to Xbox360 so freezing should be gone. And I used his roster files as base to convert Jrriv4's Xbox360 roster. Not sure if it still freezes.

UPDATE 3: I successfully accomplished Conversions of both xbox360 & ps3 NCAA14 rosters to NCAA13 and Ports of each for both consoles.>> https://forums.operationsports.com/f...7&postcount=46

Update 4: I made a port a partial working roster for NCAA 12 (2017-18 )(teams A-M) but it's very rough and poor.>>https://forums.operationsports.com/f...8&postcount=26


Update Final: https://forums.operationsports.com/f...ox360-ps3.html

(ncaa 12 is playable but still has some issues in the indicated ratings of players).

[pinbw]

For XBOX360: 2017-18 NCAA 13 roster PORT

Files are ready, go ahead and download them as "offline files". (Attachment for Xbox360 )
[I]The Rosters no longer can be downloaded in game in roster shares. (EA shut down servers on 10-24-17,).[B]
Newest links here>>https://forums.operationsports.com/f...7&postcount=46
Older original 1st rosters below:
(PS3 Vikesfan ported roster is also in redirect "link below" (thanks to Bob's conversion for PS3; and attachment of xbox360 version below).
So I made the Xbox360 roster port based on Jrriv4's Xbox360 Roster from 8-13-17. All thanks go to everyone on that team editing rosters on Jrriv4's Thread. All of their hard work is greatly appreciated.

Even though I own NCAA 14, I recently purchased NCAA 13 xb360 for $6 just to see if game play is any better or worse than NCAA 14 & so I can try out a different game play experience.

I made this based on work done by Brock and Bob last year. I just took their Roster file as a base and studied what was different, & copied the excel data for Players and Team data from new roster file.
It works but has a few issues. More testing is needed as it is a WIP. So if anyone can test it and see if anything else is broken or wrong that will be great.
ISSUES:
- Depth charts may need to be reordered on all teams; Players may be named 1st & 2nd string twice.
- UAB will have UNC Charlotte's players
-Dynasty mode may freeze on Jrriv4 file -- unsure how to fix it (It may be fixed in Bob's PS3 Vikesfan roster file.)
-old conference alignment cannot be updated.
- player faces, features, & skin tones may be off --unsure really Roster
-And a few other issues may be noticed.
Enjoy! (tested & works for playing single casual games; but may not be dynasty ready)

(I have also converted Bob's Vikesfan 8-13-17 PS3 NCAA14 roster to xbox360 file--in attachment)
Bob's conversion port of Vikesfan's 2017-18 Roster for "PS3" NCAA 13>>
http://forums.operationsports.com/fo...on-update.html )
(If I figure out how to get the PS3 save file into the Dynasty editor I will try making Jrriv4's roster for PS3. But at the moment I can't do it. I may be close to figuring it out later.. Maybe there's a PS3 guy who's good at the editor+bruteforce who can convert my NCAA 13 xbox360 roster port file and make it an NCAA 13 PS3 save file.... )

Update1: I just tried the roster and all the players are there, but strange things are happening to the depth chart (reordering helps get the right players in the right spot, but a player is sometimes named twice 1st and 2nd string). I never ported the depth chart, so in the future I may try to reup another later file into my locker. But no time right now...Enjoy what is here!
Update2: I converted Bob's PS3 NCAA 13 Vikesfan 2017-18 roster into Xbox360 NCAA 13 file with depth charts auto-realligned from 8-13-17.
Update3: I converted Bob's 8-23-17 PS3 NCAA 13 Vikesfan 2017-18 roster conversion into Xbox360 NCAA 13 file. I added AP poll to it ! (it's now in attachments below);
Also Check Bob's Conversion NCAA 13 PS3 2017-18 thread for more of my latest roster posts>>http://forums.operationsports.com/fo...on-update.html
Update 4: I have uploaded a newer Jrriv4DarkJr Roster 8-26-17 conversion: one with original default ratings, and another with pro-FL ratings just for FL fans. Most people will just be interested in the 2nd and 3rd Files.
Enjoy!

[waynehigh]

Re: 2017-18 NCAA 13 rosters?

How do I use on PS3?

[pinbw]

Re: 2017-18 NCAA 13 rosters?

How do I use on PS3?

-You can use Bob's thread for Vikesfan's Roster.

https://forums.operationsports.com/forums/ncaa-football-rosters/913193-ncaa-13-ps3-2017-2018-roster-conversion-update.html

His roster is shared under his GT = BoBs_Road

-The JrrivXbox360 Roster project roster is not available on PS3. I could try porting the Xbox360 conversion to PS3 later but it would only be loaded up as offline file only using your PS3 formatted flash drive,(since I don't own a PS3)....

[ostanton8]

Re: For XBOX360: 2017-18 NCAA 13 roster PORT

Files are ready, go ahead and download them as "offline files". (Attachment for Xbox360 )
The ported Xbox360 "Jrriv4's Roster" is no longer in my locker. (I changed it out with Vikesfan ported roster, since it might work better for Dynasty without freezes)
GT = OutrunFire0290.
(PS3 Vikesfan ported roster is also in redirect "link below" (thanks to Bob's conversion for PS3; and attachment of xbox360 version below).
So I made the Xbox360 roster port based on Jrriv4's Xbox360 Roster from 8-13-17. All thanks go to everyone on that team editing rosters on Jrriv4's Thread. All of their hard work is greatly appreciated.

Even though I own NCAA 14, I recently purchased NCAA 13 xb360 for $6 just to see if game play is any better or worse than NCAA 14 & so I can try out a different game play experience.

I made this based on work done by Brock and Bob last year. I just took their Roster file as a base and studied what was different, & copied the excel data for Players and Team data from new roster file.
It works but has a few issues. More testing is needed as it is a WIP. So if anyone can test it and see if anything else is broken or wrong that will be great.
ISSUES:
- Depth charts may need to be reordered on all teams; Players may be named 1st & 2nd string twice.
- UAB will have UNC Charlotte's players
-Dynasty mode may freeze on Jrriv4 file -- unsure how to fix it (It may be fixed in Bob's PS3 Vikesfan roster file.)
-old conference alignment cannot be updated.
- player faces, features, & skin tones may be off --unsure really Roster
-And a few other issues may be noticed.
Enjoy! (tested & works for playing single casual games; but may not be dynasty ready)

(I have also converted Bob's Vikesfan 8-13-17 PS3 NCAA14 roster to xbox360 file--in attachment)
Bob's conversion port of Vikesfan's 2017-18 Roster for "PS3" NCAA 13>>
http://forums.operationsports.com/fo...on-update.html )
(If I figure out how to get the PS3 save file into the Dynasty editor I will try making Jrriv4's roster for PS3. But at the moment I can't do it. I may be close to figuring it out later.. Maybe there's a PS3 guy who's good at the editor+bruteforce who can convert my NCAA 13 xbox360 roster port file and make it an NCAA 13 PS3 save file.... )

Update1: I just tried the roster and all the players are there, but strange things are happening to the depth chart (reordering helps get the right players in the right spot, but a player is sometimes named twice 1st and 2nd string). I never ported the depth chart, so in the future I may try to reup another later file into my locker. But no time right now...Enjoy what is here!
Update2: I converted Bob's PS3 NCAA 13 Vikesfan 2017-18 roster into Xbox360 NCAA 13 file with depth charts auto-realligned from 8-13-17.
Update3: I converted Bob's 8-23-17 PS3 NCAA 13 Vikesfan 2017-18 roster conversion into Xbox360 NCAA 13 file. I added AP poll to it ! (it's now in attachments below);
Also Check Bob's Conversion NCAA 13 PS3 2017-18 thread for more of my latest roster posts>>http://forums.operationsports.com/fo...on-update.html
Update 4: I have uploaded a newer Jrriv4DarkJr Roster 8-26-17 conversion: one with original default ratings, and another with pro-FL ratings just for FL fans. Most people will just be interested in the 2nd and 3rd Files.
Enjoy!

could you walk me through how to get this file onto my game?

[Brock]

Re: HOW TO PORT NCAA 14's (2017-18) to NCAA 13 rosters

Well, I know many of the past year's seasons were made/ported/&coverted for NCAA 2013.
In the past 3 years, The member Bob made port conversion of 2016, 2015, 2014 seasons of Vikesfan rosters for PS3 NCAA 2013.
And the member Brock made the port/conversion of the 2016 season from "NCAA 2014 to NCAA 2012" for PS3 and converted it to Xbox. And then Another user (Sparky96) helped requested it to be ported to NCAA 2013 xb360. Link:

http://forums.operationsports.com/forums/ncaa-football-rosters/891037-searching-ncaa-football-12-2016-2017-rosters-5.html

Not sure if Bob or Brock can make another conversion port this year, if they have the time & don't think it's too much work.
If no one comes through here, theoretically, you guys could use last year's roster as a starting point and painstakingly create your own roster for this year's season (but if you have no time for that, I'd just check back here month to month). You can also make the port yourself if you know how..using the editor (see my How To Port guide below).
----------------
----------------
----------------
Update 8/11/17 [How To Port NCAA 14's Newest 2017-18 Roster to Older Ncaa 13 game]
I figured out how you can make an NCAA 13 roster conversion!...Not a straightforward process, but it's possible by copying and pasting specific columns of data from NCAA 14 csv excel file to NCAA 13 csv excel file .
Open Spoiler for Instructions with Precise Steps to Convert from a NCAA14 roster file!

Spoiler

1-If you are getting the Roster from your own Console (Xbox/PS3):
You will need Modio (I use Modio3) to open a save file from an Xbox360 formatted flash drive with file saves; then Extract File Contents file which is 1.36mb. Or for PS3, use Bruteforce to open and decrypt the PS3 save file for accessing roster data file from a PS3 formatted flash drive. Open Spoiler for PS3 Save File instructions>>

Spoiler

PS3 requires to first open save file with with Bruteforce; then use it to Decrypt the files; only then, they can be opened and edited. The USR-DATA is the PS3 roster file that can be edited directly with Dynsasty Editor after adding .mc02 to the back of file name. After you are finished editing the PS3 files, you have to remove .mc02 endind & re-encrypt the PS3 save file.

2-You will need NCAA Dynasty Editor to open a Roster Contents file (1.36mb size) or PS3 USR-Data file; then you can extract Spread Sheets for Players, Teams, DepthCharts, & copy data of "the common team data" between NCAA 13 & 14 using Microsoft Excel (Note: 13 has 3 less teams than 14 and less features to copy).
**To open Roster file with Dynasty editor, add to the ending of file name ( .mc02). [To Open File with Dynasty Editor, For Xbox360 rosters just add .mc02 to name ending; For PS3, you must first decrypt Save file and then open Save File and add .mc02 to USR-Data name ending. ]

Using NCAA Dynasty Editor,
For Each NCAA 13 and NCAA 14 Roster files:
(Search for these rosters as an "offline file" from one or both 2017-18 Roster forums-
Vikesfan2017-18
Xbox2017-18project
You will also need to have an NCAA 13 save file to paste/make all new save data to. You can either make it on your xbox360, or take an older offline file and overlap new data on top of it; However the total # of players have to be a matching number for edits to be made; The number of players in Bobs conversions have all been 8455, so only this many players can be copied from NCAA 14, so the Game's final team players (UTSA) are not usually copied properly. This is the drawback of conversions if you are a fan of team UTSA.

3a- For the NCAA 14 roster you are planning to work with & port, In Dynasty editor,
You have to Export the Players data by using the Players TAB.(Go to File>Export Current Table to Excel csv file.) Also do this for Teams Tab. Also Export csv files for the "Base NCAA 13 files from Brock or Bob" for Players and Teams data so you can use them to paste/overlap and make them your new Players & Team csv files . Finally after editing/copying data, you have to use Dynasty editor & "IMPORT" csv files back into Roster file.
--------So to get started (you must work carefully and slowly)-------
Copy all the correct columns of data -I figured out exactly which columns to copy from NCAA 14 csv data files and paste them into NCAA 13 csv files. But it is important the EXCEL file structure format is not changed during the paste process.

Compare Excel files of NCAA 14 to NCAA 13 and just copy the columns that are the same. Note reason: 2014 game has 3 more teams & more features than 2013. So this will take a little patience not to add wrong data into the wrong columns in the NCAA 13 csv file.
3b.PRECISE STEPS to port Players data csv: (with Dynasty Editor), (Valid for Xbox360 roster & PS3 )-NOTE: It is easiest to only port the Player Data without errors. But Porting all of the features of Teams and Coaches csv data may result in damaged roster errors or in game freezes. You may be able to port only some of the features of those files.

-From NCAA 14 csv For each set of columns you copy, copy ROWS 1-8456 (the number of players recognized on 13 game may be 8455)
-COLUMNS TO COPY:
i. Copy COLUMN A -to- AI from NCAA 14
and paste to COLUMN A-AI on NCAA 13 file
<SKIP copying Column AJ on NCAA 14 file>
ii.Copy COLUMN AK -to- CF from NCAA 14
and paste to NCAA 13 COLUMN AJ -to-CE on NCAA 13 file
<SKIP> Column CG on NCAA 14 file>
iii. Copy COLUMN CH -to- Final COLUMN EC on NCAA 14
and paste to COLUMN CF to EA on NCAA 13 file
iv. SAVE PLAYER DATA CSV WORK. (Check over data to see if it looks right without any file structure wrong)
v. On Dynasty Editor, Import Current Table (your new PLAYER DATA) back into roster.
vi. Then use Modio to replace roster file back into your new roster save file ready to be used in XBOX 360.
(If you want Team Rankings updated, then do next step)
4-You can also Port TEAMS data (And edit Team rankings using the TEAM TAB (export data to Excel csv file - edit TCRK -column BA on Excel file; note: If you are updating rankings week to week you only need to edit the top 25 or so teams since only those are visible on game)
PRECISE STEPS to port Teams data csv: (with Dynasty Editor), (Valid for Xbox360 roster & PS3)
Note:Porting all of the features of Teams and Coaches csv data may result in damaged roster errors or in game freezes. You may only be able to port some of the features of those files eg. Rankings & O&D Team captains.

-From NCAA 14 csv For each set of columns you copy, copy ROWS of all teams that are same. So Copy Rows 2-129 (and skip 130 -132 and final HS teams). Basically, do not copy final 3 teams & the High school teams. A little tricky to copy and paste,but do it slowly.
-COLUMNS TO COPY:
i. Copy Columns A to J from NCAA 14
and paste to COLUMN A-J on NCAA 13 file
<SKIP Column K on NCAA 14 file>
ii. Copy Columns L(TLSA) to COLUMN Y(TMCC) from NCAA 14,
and paste to COLUMN K to X(TMCC) on NCAA 13 file
<SKIP Column Z on ncaa 14>
iii.Copy Columns AA to BO (TCAM) from NCAA 14,
and paste to Columns Y to BM (TCAM) on NCAA 13 file.
iv. Leave Column BN (TPTM) on NCAA 13 file alone-(note- this is not on NCAA 14)
v. Copy Columns BP (DISN) to CB (TMCP) from NCAA 14,
and paste to Columns BO -to- CA (TMCP) on NCAA 13 file.
<SKIP CC (TRCP) on NCAA 14>
vi. Copy CD to DN (TRST) from NCAA 14,
and paste to Columns CB to DL (TRST)
vii. Leave Column DM (TWTT) on NCAA 13 file alone-(note- this is not on NCAA 14)
viii. Copy Columns DO (PSAV) to Final Column EP (Tass),
and paste to Columns DN to EO (Tass).
All Finished!
Note:
-You can also Port Team Depth Chart csv file, --but you may always decide to skip this step since Dynasty Editor does not transfer depth chart data properly. Players are always in wrong position. You must do manual depth chart adjustment for each team, 20+ Positions "in game", but this will take a very long time on your part to go thru all teams and fix them. It will be worth it after you do it one time, so You can use the same file all year to overlap New Roster data on top of it through out the season.
-You may also be able to port Coaches & dept csv file, but unsure since it is known that some features ported will result in game freezes (eg.coaches file can cause loading issues; so it's safer to remove the extra teams and just copy and paste the coaches names & ages and maybe only a few other features at your own risk; So some of the feature tabs in this CSV file cause problems if copied from NCAA 14 to 13.)
If you get a damaged roster error then you may have done something wrong and have to start all over to retrace your steps. So plenty of patience is needed doing the ports.

-Users Bob (& Brock) did all of this for the PS3 game in the past. (You can use their PS3/Xbox360 roster files as a base or comparison examples to work with when creating your new roster file. Bob has been doing this for a few years for NCAA 13(PS3only) while Brock did this for 12 and 13 last year (PS3 & Xbox conversion files. This year I have started making the ports for xbox360.)

Bob>> http://forums.operationsports.com/fo...on-update.html

http://forums.operationsports.com/forums/ncaa-football-rosters/913193-ncaa-13-ps3-2017-2018-roster-conversion-update.html

Brock>> http://forums.operationsports.com/fo...pdate-ps3.html
Both the PS3 and Xbox360 data files can be edited similarly with the Dynasty editor.

*But for PS3 file,you may have to keep trying (since I couldn't get into it the first time).
-I found that You have to use PS3 Bruteforce program to open "one save file at a time" and then decrypt it and then you have to re-encrypt it after you are all done so the PS3 save file can be used in the console. (it takes trial & error to get used to Bruteforce program, but you will eventually get it..)

*Some of the problems you have to live with in 13 are (UAB will have UNC Charlotte's players.
& All teams are not in their new conferences.)
-And some player features, skin tones,& faces may be buggy and wrong.
-Finally you may have to reorder the depth charts before playing the rosters.
(All ps3 to xbox360 conversions or vise versa will have Depth chart problems so "manual" adjusting all positions "in game" is required & will take a long time on your part. Auto reorder of depth charts sometimes makes things worse, so manual adjustment is required.)
-Dynasty may freeze for some teams eg. Western Michigan and UMass.

-------------------
-------------------
Note: Porting to NCAA 12 game is a much trickier but may be possible:
Open spoiler for NCAA 12 port info:

Spoiler

-Maybe Tricky since Total number of players recognized in 12 game may be 8162 based on Brocks NCAA 12 port. So after porting players from NCAA 14/13 to NCAA 12, you may not be able to exceed total of 8162. Some of the final teams in CSV data could have less players than the first teams.
I thought teams were limited to "68 player rosters", while NCAA 13&14 have "69 player rosters"; we may have to eliminate the worst players on each team after Copying on some teams Spreadsheet data that are the same from the 14/13 game before pasting it to the 12 game; And copying of the precise Excel CSV Columns and Rows of Data that are the same in NCAA 12 & 14/13 game is required. Brocks file had many teams with 69 players while others had less. See update below. I found Spreadsheet "columns" are the same Between NCAA 13 and 12 so this makes it all possible to make the port. But it will still have the some minor problems needing manual fixing and skin tones etc other things may be wrong-things mentioned by Brock during his Port.

UPDATE: I found Brock's NCAA 12 roster file for 2016-17 season has teams with greater than 68 players retaining most of the 69 player teams found in NCAA 13 & 14. I also found Spreadsheet "Column" data being nearly identical between NCAA 13 and 12 CSV files for PLAYER & Teams data. You will have to determine which "Rows" to omit from NCAA 13/14 to match 8163 rows of spread sheet data found in NCAA12.
So it may be possible to port this easily using Brock's file as a base to work with. However, The total number of players was 8162, so some players need to be omited from NCAA 14/13. We may either randomly remove some players or make some of worst or least important teams have much less players to allow all the important teams to have all their players ported; So use Port data from NCAA13 CSV files to make NCAA 12 CSV file; I found there are 3 less teams in NCAA 12 vs 13 to omit and choose some more players to omit from various teams in order to reach a total of 8162 players or 8163 rows of player data. You may still end up with more players than 8162 from the NCAA 14 teams so not sure if it will work. So Porting to NCAA 12 will require you to remove some players from NCAA 14/13.
When Copying data from NCAA 13
*In teams CSV file---omit Umass, Texas State, and UTSA (Row 124, 126, 129) (So copy rows 1-123 exactly the same; ALL COLUMNS ARE IDENTICAL between NCAA 12 and 13 EXCEPT Column AC (TCID) from NCAA 13.
*In Players CSV file---omit players from Umass, Texas State, and UTSA (AC column is team id TGID, so omit players with AC 181, 218, and 232.
ALL COLUMNS ARE IDENTICAL between NCAA 12 and 13; but the difficulty is found here: Number of Rows of player data does not match Brocks Base file roster of 8163. So extra players also need to be made within the game for certain teams to match the NCAA 13/14 roster file or players from NCAA 13/14 will need to be omited. This will make it confusing to copy and paste the player data you want. It will be a slow process to figure out. SO I AM STUCK HERE.

-If you managed to get the roster ported, then the next problem would likely be Depth charts needing manual adjusting, since they are not compatible due to different number of players & teams between ncaa 12 & 14/13.
-Note: Other things you may have to do in the port is fix Skintones, faces in Players data; In teams data you have to port the team's preseason rankings(step4 above), update team impact players, & renaming of certain teams that changed. -Brock did all of this last year.
The Team data codes for these are as follows: OCAP and DCAP Offensive & Defensive Team Captains;TSI1, TSI2, TMPI,TPIO are 4 impact players; TCRK & TMRK are team rankings to adjust the poll.

--So all of the above is possible to port NCAA 14 Vikesfan's newest 2017-18 roster and port jrriv4's Xbox360 2017/2018 project roster to the 13 game and maybe 12 game. I did not do any of this yet, but I may later. I put this Guide out here in case anyone else wants to attempt it themself. They will need patience & time going though all the steps above & make it all work.
**I don't really need these ports since I usually only play the 14 game. But with this Guide, someone who only has 12 or 13 now knows what is involved in porting rosters from 14 to 13 or even12 and they can attempt it themself.

Update8/17: I've had 12, but just recently purchased 13 in case someone makes this, so I 'm still interested in this).
UPDATE: I am ready to share an untested roster file I attempted porting for Xbox360 (sorry not experienced with PS3 save file decrypting/encrypting). I Will post soon next pos....
UPDATE 2: File loads up fine for casual play, but Dynasty freezes the game. But an attempt was recently made to fix it. So it may work now without freezes. The VikesfanPS3 roster freezing was fixed with by Bob, and I converted it to Xbox360 so freezing should be gone. And I used his roster files as base to convert Jrriv4's Xbox360 roster. Not sure if it still freezes.

UPDATE 3: I successfully accomplished Conversions of both xbox360 & ps3 NCAA14 rosters to NCAA13 and Ports of each for both consoles.>> https://forums.operationsports.com/f...7&postcount=46

It's been a long time since I've did anything with editor, as I don't play the newer gen NCAA games and I was just messing around with the editor for the first time. But, I believe I still have my notes on fixing the skintones and whatnot on my laptop. I'll see if I can find it and post it for anyone that may want to port for 12.

I skimmed through you assessment of porting, and I believe it was spot on (lol it's been so long, I barely remember doing most of it. It was like a weird passion project for me at the time). But For my final update I ported directly from Vikes' and the guys rosters, but doing some editing with the ps2 games and searching through definitions of columns, it wasn't really hard to do at the time.