Users Online Now: 2435  |  January 25, 2020
angelina's Blog
iTech Cables 
Posted on December 9, 2019 at 03:59 PM.
iTechCables is manufacturer of all Ethernet Cable Category 5e Cat6 Plenum CMP rated cables, together with Superior quality RJ45 connector, patch cables, keystone jacks, Wall Plates, and other accessories, By providing a five-star administrations to our Cables customers, for custom cables as well as your structured cabling projects you should simply call us or send us an e-mail.

Cat6 cable (Cat 6), is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat 6 has to meet more stringent specifications for crosstalk and system noise than Cat 5 and Cat5e. The cable standard specifies performance of up to 250 MHz, compared to 100 MHz for Cat 5 and Cat 5e.

Whereas Cat6 cable has a reduced maximum length of 55 meters when used for 10GBASE-T, Category 6A cable (or Augmented Category 6) is characterized to 500 MHz and has improved alien crosstalk characteristics, allowing 10GBASE-T to be run for the same 100 meter maximum distance as previous Ethernet variants.

Installation requirements:

Category 6 and 6A cable must be properly installed and terminated to meet specifications. The cable must not be kinked or bent too tightly; the bend radius should be larger than four times the outer diameter of the cable. The wire pairs must not be untwisted and the outer jacket must not be stripped back more than 1/2" (12.7 mm).

Cable shielding may be required in order to improve a Cat 6 cable's performance in high electromagnetic interference (EMI) environments. This shielding reduces the corrupting effect of EMI on the cable's data. Shielding is typically maintained from one cable end to the other using a drain wire that runs through the cable alongside the twisted pairs. The shield's electrical connection to the chassis on each end is made through the jacks.

The requirement for ground connections at both cable ends creates the possibility that a ground loop may result if one of the networked chassis is at different instantaneous electrical potential with respect to its mate. This undesirable situation may compel currents to flow between chassis through the network cable shield, and these currents may in turn induce detrimental noise in the signal being carried by the cable.

Maximum length:

When used for 10/100/1000BASE-T, the maximum allowed length of a Cat 6 cable is 305 meters (1000ft). This consists of 305 meters (1000ft) of solid "horizontal" cabling between the patch panel and the wall jack, plus 5 meters (16 ft.) of stranded patch cable between each jack and the attached device. For 10GBASE-T, an unshielded Cat 6 cable should not exceed 55 meters and a Cat6A cable should not exceed 100 meters
Description

Cat6a Bare Copper 1000ft Plenum CMP Rated UTP Bulk Ethernet Cable is designed to achieve a maximum distance of 100 meters for full 10 Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 cannot. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e.CAT6A Plenum CMP Rated Cable conductors featuring 23 AWG 4 Pairs with unshielded twisted pair (UTP) are Solid Bare Copper, which insures performance with high-speed Gigabit Ethernet.

iTechCables is the perfect fit for reliable installations where the cable will be used indoors. Our Cat6a Plenum Bare Copper is fire safety rated cable which contains a flame-******ant Plenum jacket that produces less smoke than traditional Plenum jackets. All of our Plenum UTP Cat6a Bare Copper 1000ft Plenum Bulk Ethernet Cable is available in Blue/White/Grey/Black colors and comes on a tough wooden-spool to make the installation easier.

iTechCables meet ANSI/TIA/EIA-568B.2, ISO/IEC 11801 standards up to 500 MHz bandwidth capacity tested with enhanced data & voice and security capabilities and is verified by outside standards organizations including ISO/IEC us as well as being RoHS Compliant. It also supports Ethernet 100BASE-TX, 100BASE-VG and 155 ATM. Particularly-suited for high bandwidth applications such as 622 ATM. Wideband Ethernet 1000BASE-T and emerging applications with anticipated data rates.
650MHz/23AWG/CMP/BC Conductors is best for your indoor voice, data, video, and security networking applications. Some common applications for this kind of cable embody retrofitting; cat6a cable is best for putting in plenum spacing due to its fire-resistive qualities. Whether or not you’re wiring your home, workplace or entire field, iTechCables have the most effective network resolution for you. Get highest qualitative Cat6a plenum rated jacket and conductor is a thousandth solid copper created.

iTechCables offer highest quality Cat6A plenum 4-pair solid conductor terribly low smoke RoHS criticism jacket for indoor local area network networking applications. Cat6A TIA/EIA certified. iTechCables Cat6A protected CMP Rated Plenum Cable is intended for residential/commercial local area network applications and is proof against hearth and warmth, creating it the most effective resolution for installation runs that need plenum rated.

Cat6a local area network cables are eight conductors (4-Pairs) of solid vacant copper with high-density polyethylene (HDPE) insulation and a CMP rated Jacket (fire-resistant).


Cat6a Plenum Bare Copper | Cat6a Plenum Solid Copper | Cat6a Plenum Pure Copper | Cat6a Plenum | Cat6a Plenum 1000ft | Cat6a Plenum cable | Cat6 Plenum Bare Copper | Cat6 Plenum Solid Copper | Cat6 Plenum Pure Copper | Cat6 Plenum | Cat6 Plenum 1000ft | Cat6 Plenum cable | Cat5e Plenum | Cat5e Plenum Cable
Comments
This entry has not received any comments yet. You could be the first to leave one.

 
angelina
0
angelina's Blog Categories
angelina's Screenshots (0)

angelina does not have any albums to display.
angelina's Friends
Recent Visitors
The last 9 visitor(s) to this Arena were:

angelina's Arena has had 2,391 visits