09-24-2010, 10:22 AM | #1 | ||
College Prospect
Join Date: Dec 2004
Location: An Oregonian deep in the heart of Texas.
|
Ping: plumbers or DIYers
So my water pressure reducing valve has crapped out, I’m getting 100psi of water pressure in the house right now. Great for showers, but not so great for the constantly running toilets.
It looks pretty straight forward, but I called a plumber this morning and he quoted me $600-$1000. The quote was a lot more than I was expecting, which has me worried that there is more to this. So has anyone replaced one of these themselves? What am I missing? |
||
09-24-2010, 10:38 AM | #2 |
Hall Of Famer
Join Date: Dec 2003
Location: the yo'
|
Well water?
I replaced the switch this summer, it was easy as crap. This appears to be different, but I don't see how it's going to be a 600 dollar job. Water Pressure Reducing Valves - Water Conservation - Learn About - Watts Maybe your house is older and the dude was assuming that he'd have to replace the valve, plus rework several pipings? If it were me(and I'm cheap and delusional) I'd match up what I have at lowes, and try to replace it myself. |
09-24-2010, 11:02 AM | #3 | |
College Prospect
Join Date: Dec 2004
Location: An Oregonian deep in the heart of Texas.
|
Quote:
Not well water, the PRV is just fitted onto the main pipe coming in from the street about three feet short of the house. I’m sure the phone quote was on the high side since he can’t know what is involved; he’s coming by this afternoon for a free quote. It looks like the part alone is going to be $100 or so. I’m pretty sure I’ll give it a go myself. Worst case scenario is I can’t get it done and I have to call him to come out and finish it. I don’t think I can screw anything up to badly (famous last words.) |
|
09-24-2010, 11:14 AM | #4 |
Coordinator
Join Date: Aug 2001
Location: Buffalo, NY
|
Check with you're local water company, they may have a program to replace it either cheaper or with payments and you can be assured it gets done properly.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
|
|