Roster Version 0.9 is out.
http://www.mediafire.com/?v871r6uga5mvqiw
It is somewhat of a hassel to get this to work, but isnt too hard.
1) Format your flashdrive on your xbox (insert it, and follow instructions on xbox)
1a) Go save something nhl 10 related onto it, just to be sure (can someone confirm if this is needed or not)
2) Download the roster file, and http://halo.gruntmods.com/Files/Xtaf_Release_Gui_.rar
3) Extract my roster file and the program you downloaded from the above link.
4) Insert you flashdrive to computer.
5) Open up Xtaf (thing you just downloaded)
6) Click file, and hit open drive.
7) You should see 2 "partitions" Data and Cache, open up data (click the little plus)
8) You should now see "content", click on it
9) Drag all folders inside my roster file except for the first, so start with the folder named E000012D48A5964B to the box on the right of the box containing data/cache/content.
10) Click file and hit close drive
11) Put your flashdrive into your xbox, log out of your profile and log into jmonsroster profile
12) Start the game, Select your flashdrive when prompted and jmonsroster profile if prompted again.
13) Skip the tutorial if it pops up (did once for me while testing, didnt the other time, so idk)
14) Make sure the roster is loaded and go to edit lines and look at the ducks, if Cam fowler is on the d, you have did the first 13 steps right.
15) Go to edit player, and select anybody, once in the edit player screen log out of the jmonsroster profile and log into yours.
16) Leave the edit player screen and hit accept changes even though you didnt change anything.
17) You'll get some message about not being the lead profile, go into profile management and set your self as lead/active and MAKE SURE when you are prompted to select a memory unit you select your flash drive or it will not work.
18) go to edit lines, and check again, if fowler is there still, your good. Go Save your roster to your flash drive first, then your harddrive.
19) If it didnt work, log back into my profile and try again.
20) Enjoy and yell at me because x player is overrated or underrated
Any questions, comments, concerns, tips or help is welcome.
Whats new:
Lines are much better for most teams
Be-a-Gm is playable now without cap on.
I'm happy with player ratings for most players
Teams are starting to look more like they will on opening day.
Fixed most goal equipment
Whats not done yet:
Kovalchuk drama isnt over yet (will it ever end)
Still only have top 20 rookies.
Teams in real life are not complete enough for me to fill out the rosters in game for all teams.
If any player rating look off, tell me.
Or if any player is on the wrong team (as long as he has another team)
Also any rookies not made so far that you want created, let me know.
Thanks to petrpuck for the base roster
http://www.mediafire.com/?v871r6uga5mvqiw
It is somewhat of a hassel to get this to work, but isnt too hard.
1) Format your flashdrive on your xbox (insert it, and follow instructions on xbox)
1a) Go save something nhl 10 related onto it, just to be sure (can someone confirm if this is needed or not)
2) Download the roster file, and http://halo.gruntmods.com/Files/Xtaf_Release_Gui_.rar
3) Extract my roster file and the program you downloaded from the above link.
4) Insert you flashdrive to computer.
5) Open up Xtaf (thing you just downloaded)
6) Click file, and hit open drive.
7) You should see 2 "partitions" Data and Cache, open up data (click the little plus)
8) You should now see "content", click on it
9) Drag all folders inside my roster file except for the first, so start with the folder named E000012D48A5964B to the box on the right of the box containing data/cache/content.
10) Click file and hit close drive
11) Put your flashdrive into your xbox, log out of your profile and log into jmonsroster profile
12) Start the game, Select your flashdrive when prompted and jmonsroster profile if prompted again.
13) Skip the tutorial if it pops up (did once for me while testing, didnt the other time, so idk)
14) Make sure the roster is loaded and go to edit lines and look at the ducks, if Cam fowler is on the d, you have did the first 13 steps right.
15) Go to edit player, and select anybody, once in the edit player screen log out of the jmonsroster profile and log into yours.
16) Leave the edit player screen and hit accept changes even though you didnt change anything.
17) You'll get some message about not being the lead profile, go into profile management and set your self as lead/active and MAKE SURE when you are prompted to select a memory unit you select your flash drive or it will not work.
18) go to edit lines, and check again, if fowler is there still, your good. Go Save your roster to your flash drive first, then your harddrive.
19) If it didnt work, log back into my profile and try again.
20) Enjoy and yell at me because x player is overrated or underrated
Any questions, comments, concerns, tips or help is welcome.
Whats new:
Lines are much better for most teams
Be-a-Gm is playable now without cap on.
I'm happy with player ratings for most players
Teams are starting to look more like they will on opening day.
Fixed most goal equipment
Whats not done yet:
Kovalchuk drama isnt over yet (will it ever end)
Still only have top 20 rookies.
Teams in real life are not complete enough for me to fill out the rosters in game for all teams.
If any player rating look off, tell me.
Or if any player is on the wrong team (as long as he has another team)
Also any rookies not made so far that you want created, let me know.
Thanks to petrpuck for the base roster
Comment