Any collectors of Riddell pocket pro helmets on here?

[Votto4MVP]

Hey everybody, I was just wondering if any of you collect Riddell NCAA Pocket Pro helmets. If so, we could all discuss and compare collections here, as I was unable to find any current threads on any forum on this topic.

I have a few conferences from the traditional helmet days before the Revolution series, but got into collecting a bit more after the Revolutions came out.

Unfortunately for me, I didn't get the MWC, Big East and C-USA when they could all be had for under $20, and as a result, I am now doomed to search ebay night and day. (although I did get lucky with a few individual helmets)

Also, feel free to share any custom helmets you may have done.

Hoping there are still some of you out there!

[coogrfan]

Re: Any collectors of Riddell pocket pro helmets on here?



The above is a mix of factory produced and customs (some from ebay, some DIY). Off screen to the right I have full set of NFL helmets as well.

[canesfins]

Re: Any collectors of Riddell pocket pro helmets on here?

The above is a mix of factory produced and customs (some from ebay, some DIY). Off screen to the right I have full set of NFL helmets as well.

That is such a beautiful sight.

[SpartyParty11]

Re: Any collectors of Riddell pocket pro helmets on here?

The above is a mix of factory produced and customs (some from ebay, some DIY). Off screen to the right I have full set of NFL helmets as well.

That case wouldn't be able to fit all of Oregon's helmets
However, great collection. I only have the Big 10, before they got Nebraska. I used to have the MAC helmets but I believe I stored them away somewhere

[Votto4MVP]

Re: Any collectors of Riddell pocket pro helmets on here?

That is such a beautiful sight.

ditto that.

coogrfan, what kind of finish did you use on your helmets? i like the gloss.


As for my collection, I have all the common major conferences (ACC, B10, Big 12, Pac 12, SEC) plus a couple random Big East helmets I was lucky to find. (Cincinnati, Louisville, USF)

I'm excited for the new sets this year, especially with Rutgers coming to the B10.

[canesfins]

Re: Any collectors of Riddell pocket pro helmets on here?

you guys should get the Boise State helmet. The black,white, or blue are one of my favorites.

[coogrfan]

Re: Any collectors of Riddell pocket pro helmets on here?

coogrfan, what kind of finish did you use on your helmets? i like the gloss.

My gloss coat of choice is a wonderful self leveling acrylic floor finish that has been on the market for decades under various names ("Future" became "Pledge with Future Shine" then "Pledge Vinyl and Tile Floor Finish with Future Shine" and finally it's current incarnation "Pledge Floor Care Multi-surface Finish".).

Scale modelers use it to make clear parts look thinner and clearer and as a gloss coat prior to applying decals. The current packaging looks like this:

http://www.walmart.com/ip/Pledge-Floor-Care-27-fl-oz/15136693

Note that Johnson in their wisdom has chosen to market several floor care products with very similar looking packaging but wildly different formulas (i.e. non-acrylic). Be sure you get the right one!

Pour some in a container deep enough to submerge the helmet. Remove the facemask. Using tweezers, grasp the helmet by the nose bumper and dip it until it's completely covered, then slowly lift it out allowing the excess to drip off. Place the helmet on a paper towel to wick away any remaining excess and cover it so that no dust settles on it while it's drying (I use a large coffee cup). It should be dry to the touch within 30-60 mins.

[Votto4MVP]

Re: Any collectors of Riddell pocket pro helmets on here?

My gloss coat of choice is a wonderful self leveling acrylic floor finish that has been on the market for decades under various names ("Future" became "Pledge with Future Shine" then "Pledge Vinyl and Tile Floor Finish with Future Shine" and finally it's current incarnation "Pledge Floor Care Multi-surface Finish".).

Scale modelers use it to make clear parts look thinner and clearer and as a gloss coat prior to applying decals. The current packaging looks like this:

http://www.walmart.com/ip/Pledge-Floor-Care-27-fl-oz/15136693

Note that Johnson in their wisdom has chosen to market several floor care products with very similar looking packaging but wildly different formulas (i.e. non-acrylic). Be sure you get the right one!

Pour some in a container deep enough to submerge the helmet. Remove the facemask. Using tweezers, grasp the helmet by the nose bumper and dip it until it's completely covered, then slowly lift it out allowing the excess to drip off. Place the helmet on a paper towel to wick away any remaining excess and cover it so that no dust settles on it while it's drying (I use a large coffee cup). It should be dry to the touch within 30-60 mins.

thank you! For both the recommendation, and the clear directions. Think I'll try it out when I have time, on one of my duplicate helmets, before trying it on one of my customs.

[coogrfan]

Re: Any collectors of Riddell pocket pro helmets on here?

A couple more points:

• I no longer gloss coat white PP's because I have yet to find a product that does not yellow over time. The unpainted white plastic Riddell uses seems especially prone to this. The good news is that the other colors seem to be immune (even the ones with white stripes/logos).
• Use caution when glossing already finished customs. Some customizers use stickers (as opposed to water slide decals), Future will make the ink run. Decals generally have no problems but it might be a good idea to test an inconspicuous spot first just to be sure. If you're doing your own customs you should gloss the helmet before applying any logos. Once it's dried for 24-48 hours you can apply either type with no problems.

[Aggies7]

Re: Any collectors of Riddell pocket pro helmets on here?

I have all of the old Big XII and the whole NFL. Would love a full college set. Also have all of MLB I bought at a game a long while back

[GOheels2627]

Re: Any collectors of Riddell pocket pro helmets on here?

i have the nfl, ACC, SEC and a Arkansas throwback custom

[Aggies7]

Re: Any collectors of Riddell pocket pro helmets on here?

i have the nfl, ACC, SEC and a Arkansas throwback custom

I have NFL and a case for them. The NCAA ones I have I don't have a case. I haven't found a case for them. Would like to expand that collection.

[coogrfan]

Re: Any collectors of Riddell pocket pro helmets on here?

Updated with new UConn, ECU and Tulane customs (eBay).

[Votto4MVP]

Re: Any collectors of Riddell pocket pro helmets on here?

sick collection, coogrfan. I still have yet to try the gloss, but am curious and looking forward to the results. My only addition as of late, is a second USF helmet...still the older gold helmet, but my new one has a green facemask and logo, whereas my old one has black

[Votto4MVP]

Re: Any collectors of Riddell pocket pro helmets on here?

also, for those of you who have made customs...what kind of paint do you use? model paint? spray paint? thanks