Potentially Stupid Building a Comp Question

CraigSca · 12-29-2006, 06:41 PM

So, I'm building a new PC as well as retro-fitting an older one for the kids. I've got fans flying everywhere, and my question is - in general, do I want the fans to suck out the hot air in the case or blow into it?

It seems the power supply sucks air into it and out the back of the chassis, and the CPU fan blows air off the CPU to disperse the heat. What about the 80mm fan that's located on the door of the chassis? What about the 120mm in the back of the chassis?

Glengoyne · 12-29-2006, 07:11 PM

For optimum cooling. Fans should both blow and suck!

Rig one on the front as an intake or output, and one or more on the back to do the opposite. You want air flow. Maximum Airflow even.

cartman · 12-29-2006, 07:50 PM

There are different camps on the ratio of blow/suck. (can't think of a better way to put it)

Some people feel that creating positive pressure, where there are more intake fans than exhaust fans is better, since that creates more possible air movement since the air has to travel more before getting exhausted, absorbing more heat. Others feel that the opposite should occur, since they feel that more direct airflow over the components is better.

Not sure which approach is best, if there is much difference at all.

sabotai · 12-29-2006, 08:27 PM

She's gone from suck to blow!

gstelmack · 12-29-2006, 10:34 PM

The key is to suck new air in from the front of the case and blow it out the back of the case (like the power supply fan is doing). You want movement through the case. Ideally put a fan in each spot your case has; my Antec has two in front and two in the back.

In most cases, you don't need to get too worried about all the other details being talked about. Usually a fan or two on the front and a fan or two on the back is fine. It's the overclockers (who generate more heat, and get a more reliable overclocking from getting rid of that heat) who get truly picky about pressure differentials and all that stuff.

Also look for variable-speed fans and a power supply that can drive them. It can help keep the noise down by driving the fan speed based on case temp.

12-29-2006, 07:50 PM	#3
cartman Death Herald Join Date: Nov 2000 Location: Le stelle la notte sono grandi e luminose nel cuore profondo del Texas	There are different camps on the ratio of blow/suck. (can't think of a better way to put it) Some people feel that creating positive pressure, where there are more intake fans than exhaust fans is better, since that creates more possible air movement since the air has to travel more before getting exhausted, absorbing more heat. Others feel that the opposite should occur, since they feel that more direct airflow over the components is better. Not sure which approach is best, if there is much difference at all. __________________ Thinkin' of a master plan 'Cuz ain't nuthin' but sweat inside my hand So I dig into my pocket, all my money is spent So I dig deeper but still comin' up with lint Last edited by cartman : 12-29-2006 at 07:50 PM.

12-29-2006, 10:34 PM	#5
gstelmack Pro Starter Join Date: Oct 2000 Location: Cary, NC	The key is to suck new air in from the front of the case and blow it out the back of the case (like the power supply fan is doing). You want movement through the case. Ideally put a fan in each spot your case has; my Antec has two in front and two in the back. In most cases, you don't need to get too worried about all the other details being talked about. Usually a fan or two on the front and a fan or two on the back is fine. It's the overclockers (who generate more heat, and get a more reliable overclocking from getting rid of that heat) who get truly picky about pressure differentials and all that stuff. Also look for variable-speed fans and a power supply that can drive them. It can help keep the noise down by driving the fan speed based on case temp. __________________ -- Greg -- Author of various FOF utilities

12-29-2006, 07:11 PM	#2
Glengoyne Grizzled Veteran Join Date: Sep 2003 Location: Fresno, CA	For optimum cooling. Fans should both blow and suck! Rig one on the front as an intake or output, and one or more on the back to do the opposite. You want air flow. Maximum Airflow even.

12-29-2006, 08:27 PM	#4
sabotai General Manager Join Date: Oct 2000 Location: The Satellite of Love	She's gone from suck to blow!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)