The Phenix Legend set v2.0 is to be used the entire Franchise Mode( Legend) or you plan to change it? if i change pitcher confidence to ON , is going to affect the type of Slider that you have set?
The Phoenix Legend set v2.0
Collapse
Recommended Videos
Collapse
X
-
Re: The Phoenix Legend set v2.0
The Phenix Legend set v2.0 is to be used the entire Franchise Mode( Legend) or you plan to change it? if i change pitcher confidence to ON , is going to affect the type of Slider that you have set? -
Re: The Phoenix Legend set v2.0
With enabling pitcher confidence, you are going to see pitchers struggle much more if they get off to a bad start and pitchers dominate much more if they get off to a good start. There's really no sliders changes to make to counteract that.Comment
-
Re: The Phoenix Legend set v2.0
suppose it was a slider, would you have it somewhere in the middle of where it is now?Comment
-
Re: The Phoenix Legend set v2.0
Yeah, I think it's an extreme in momentum considering the game already has built-in pitcher confidence that you can't turn off. If there was a slider for confidence stuff, I would probably lower it a bit considering batters have confidence as well.Comment
-
Re: The Phoenix Legend set v2.0
I've been playing with pitch control at +1 far about 10 games, and right now I'm leaning to putting pitch control back at default (0). I've just been pitching too well and haven't been drawing enough walks. My good pitching might be due to a good streak or something. Also, maybe I just haven't been patience enough at the plate lately but I just haven't been drawing any walks. Control pitchers seem to throw more balls but non-control pitchers are throwing too many strikes in my opinion. I leaning to the conclusion that pitch control at anything but default is a bad idea. I'm going to try a few more games and try my best to be patient and see how things go.Comment
-
Re: The Phoenix Legend set v2.0
Hi,
I lowered contact at - 3 for me and the CPU. 10 games in Spring Training....I'm 2-8 with a .235 BA and a 5.15 ERA. I suppose that when I will cut poor players.....my stats will be better.
I hit a lot of singles and don't produce a lot of runs. Do you think the first slider I should adjust is contact, power or solid hits???Comment
-
Re: The Phoenix Legend set v2.0
Hi,
I lowered contact at - 3 for me and the CPU. 10 games in Spring Training....I'm 2-8 with a .235 BA and a 5.15 ERA. I suppose that when I will cut poor players.....my stats will be better.
I hit a lot of singles and don't produce a lot of runs. Do you think the first slider I should adjust is contact, power or solid hits???Comment
-
Re: The Phoenix Legend set v2.0
Hey Phoenix, you seem to have a good idea on what these sliders do so I have a general question.
I'm pretty much using your Legend sliders with a few tweaks. I'm using your Contact(-2)/Power(-3) but moved timing to -3, but the CPU wasn't hitting good enough, so I moved it to -2, and not only are they still not hitting enough, but now I can't get K's anymore because they literally make contact with everything.
They still get a realistic amount of hits but definitely not enough runs because when I really focus in with runners on base I usually get the outs that I need to.
So before I start tweaking with things I wanted to get some advice from you, with the information given, is their any way you think I can get them to hit well enough while not making contact with everything?(which doesn't allow me to get K's). Like do you think -3 contact, -2 timing would work? or -1 contact, -3 timing? Basically a combination of taking timing down and putting contact up, or putting contact down and leave the timing the way it is or up it. Maybe tweak with Solid Hits? I don't know, let me know what combination you think would work for my problem.
Thanks. Your sliders have been great for my franchise.NBA: Los Angeles Lakers
NFL: San Francisco 49ers
MLB: San Francisco Giants // Oakland A's
CFB: USC TrojansComment
-
Re: The Phoenix Legend set v2.0
Hey Phoenix, you seem to have a good idea on what these sliders do so I have a general question.
I'm pretty much using your Legend sliders with a few tweaks. I'm using your Contact(-2)/Power(-3) but moved timing to -3, but the CPU wasn't hitting good enough, so I moved it to -2, and not only are they still not hitting enough, but now I can't get K's anymore because they literally make contact with everything.
They still get a realistic amount of hits but definitely not enough runs because when I really focus in with runners on base I usually get the outs that I need to.
So before I start tweaking with things I wanted to get some advice from you, with the information given, is their any way you think I can get them to hit well enough while not making contact with everything?(which doesn't allow me to get K's). Like do you think -3 contact, -2 timing would work? or -1 contact, -3 timing? Basically a combination of taking timing down and putting contact up, or putting contact down and leave the timing the way it is or up it. Maybe tweak with Solid Hits? I don't know, let me know what combination you think would work for my problem.
Thanks. Your sliders have been great for my franchise.
I have lowered the strike frequency slider to -2. Just not getting enough walks. And, I've come to the conclusion that if you only use the contact swing, bump up power to -2 for the user as you won't see enough doubles and HRs.Last edited by Phoenixmgs; 04-17-2009, 06:34 AM.Comment
-
Re: The Phoenix Legend set v2.0
Wow, in my opinion, the CPU still hits a tad too much. You might be the first person having CPU offense problems on legend. Do you by any chance have pitch control higher than default? That will make pitching too easy. You can try -3 contact with timing somewhere between -2 and 0. I had contact at -3 for awhile but the CPU just made first pitch outs far too often in my opinion and I was able to strikeout guys like David Eckstein too easily. I would think at -1 contact the CPU would be too disciplined at the plate, even at -2 the CPU sometimes doesn't even flinch on perfect sliders just off the plate. Maybe dropping solids hit a lot would do something, the solid hits slider seems to do the least of all the batting sliders though. I leave it at default as I'm afraid it may drop the amount of doubles, I had it down at -3 at a time and it didn't seem to drop hit totals at all.
I have lowered the strike frequency slider to -2. Just not getting enough walks. And, I've come to the conclusion that if you only use the contact swing, bump up power to -2 for the user as you won't see enough doubles and HRs.
I'm gonna try what you suggested with contact/timing though, thanks.NBA: Los Angeles Lakers
NFL: San Francisco 49ers
MLB: San Francisco Giants // Oakland A's
CFB: USC TrojansComment
-
Re: The Phoenix Legend set v2.0
Hey Phoenix, still using these sliders? I've played a few games with them, and almost everything feels great. The one issue I have with them is the CPU pitchers aren't throwing enough balls. 90% of my at bats go 0-1,0-2,1-2, then they paint the corner and i'm pretty much forced to swing. What sliders do you think I should tweak to draw some walks? I'm hesitant to change anything because I don't want to change something and have them start catching a bit too much of the plate, or never be able to find the strike zone.
Any suggestions?
Other than that, these are some really good sliders.Comment
-
Re: The Phoenix Legend set v2.0
Hey Phoenix, still using these sliders? I've played a few games with them, and almost everything feels great. The one issue I have with them is the CPU pitchers aren't throwing enough balls. 90% of my at bats go 0-1,0-2,1-2, then they paint the corner and i'm pretty much forced to swing. What sliders do you think I should tweak to draw some walks? I'm hesitant to change anything because I don't want to change something and have them start catching a bit too much of the plate, or never be able to find the strike zone.
Any suggestions?
Other than that, these are some really good sliders.
CPU pitch control: +2
CPU consistency: +2
CPU strike frequency: -2
Thoses are the sliders that affects balls and walks. Now, if that doesn't work, try lowering CPU consistency down to like -2/-3 as that has been worked for some people in the "Drawing walks?" thread. I really like CPU consistency where I have it for hit batters, wild pitches, and pass balls.
I've changed some other sliders a touch as well, and I'll go and update the first post with my changes. I won't officially change CPU pitch control and strike frequency on the first page as I have not tested them in a normal game yet.Last edited by Phoenixmgs; 05-15-2009, 06:17 AM.Comment
-
Re: The Phoenix Legend set v2.0
Before you posted that, I played a couple games using Skyboxers sliders for everything pertaining to CPU pitching (I bumped pitching consistency up 1 from his to lower the amount ofwild pitches), and yours for everything else. So far its working well for me. If I end up hitting too well though, I will try your suggestions out. Thanks for the input, its much appreciated.
I'm having a lot of fun with this set of sliders. They're definitely tough, but everything that happens seems like it SHOULD have happened that way, which I love. I'm seeing a lot of variety in games too. Blow outs, pitching duels etc etc. Great workComment
-
Re: The Phoenix Legend set v2.0
Yeah, the CPU gets into that mode where you have to make perfect pitches or get lucky with balls hit right at a fielder. I don't think there's anyway to avoid that. It really sad at times because I actually will do an in-game save at times just in case the CPU BS happens to I can reload the game, it's really that bad at times.Comment
Comment