WoW professions

Collapse

Recommended Videos

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TCrouch
    MVP
    • Jul 2002
    • 4819

    #16
    Re: WoW professions

    Try the vendors right next to the Enchanting trainer. There are also reagent vendors in spots, those are the ones you're looking for usually.

    Comment

    • TCrouch
      MVP
      • Jul 2002
      • 4819

      #17
      Re: WoW professions

      Try the vendors right next to the Enchanting trainer. There are also reagent vendors in spots, those are the ones you're looking for usually.

      Comment

      • mgoblue
        Go Wings!
        • Jul 2002
        • 25477

        #18
        Re: WoW professions

        Originally posted by TCrouch
        On Korax my Blacksmith is at 110 currently, and mining 100. I found a tin ore deposit last night, but some little wanker came up and snaked it while I was fighting some bigass bear. Oh well.

        Predator is a 120 skinner/75 leatherworker, but I'm hardly ever on that guy.

        I'm dedicating all of my profession time to Blacksmithing, because it's by far the most useful profession for me. Everybody needs a good weapon, and I can make some doozies right now.
        wow, 110 all ready? i'll have those pearl daggers in no time, only needs 6 bronze bars (ouch, that's the one that hurts, tin is kinda rare right now, i'll see if I can buy it anywhere, but I'll have to lvl 2 times before I could use them, that'll take some time), 1 strong flux, 2 pearls, 2 grinding stones per dagger. I can buy the flux once I'm out of the poor house. I'm currently at like 6-7ish dps, this'll like double my dps once I hit 18. I must

        It'll be nice having an enchanter, haven't had any experience with one yet
        Nintendo Switch Friend Code: SW-7009-7102-8818

        Comment

        • mgoblue
          Go Wings!
          • Jul 2002
          • 25477

          #19
          Re: WoW professions

          Originally posted by TCrouch
          On Korax my Blacksmith is at 110 currently, and mining 100. I found a tin ore deposit last night, but some little wanker came up and snaked it while I was fighting some bigass bear. Oh well.

          Predator is a 120 skinner/75 leatherworker, but I'm hardly ever on that guy.

          I'm dedicating all of my profession time to Blacksmithing, because it's by far the most useful profession for me. Everybody needs a good weapon, and I can make some doozies right now.
          wow, 110 all ready? i'll have those pearl daggers in no time, only needs 6 bronze bars (ouch, that's the one that hurts, tin is kinda rare right now, i'll see if I can buy it anywhere, but I'll have to lvl 2 times before I could use them, that'll take some time), 1 strong flux, 2 pearls, 2 grinding stones per dagger. I can buy the flux once I'm out of the poor house. I'm currently at like 6-7ish dps, this'll like double my dps once I hit 18. I must

          It'll be nice having an enchanter, haven't had any experience with one yet
          Nintendo Switch Friend Code: SW-7009-7102-8818

          Comment

          • TCrouch
            MVP
            • Jul 2002
            • 4819

            #20
            Re: WoW professions

            Keep in mind the Bronze Daggers still have 10.x DPS, and I can make those with far fewer rare components.

            Comment

            • TCrouch
              MVP
              • Jul 2002
              • 4819

              #21
              Re: WoW professions

              Keep in mind the Bronze Daggers still have 10.x DPS, and I can make those with far fewer rare components.

              Comment

              • mgoblue
                Go Wings!
                • Jul 2002
                • 25477

                #22
                Re: WoW professions

                Originally posted by TCrouch
                Keep in mind the Bronze Daggers still have 10.x DPS, and I can make those with far fewer rare components.
                they both need tin, i've got the pearls, Strong flux I can buy, and aren't course grinding stones easy to make? I know there's not a big difference between the two though, you're right. I'm gonna see if I can buy any tin somewhere, because i'll need 12 (6 for each dagger), and that's a lot to ask you to mine...I'll get it somehow, i'm fine with my current daggers till I hit 18 anyways, so this is just planning. I'd rather have the pearl ones since they're a little better, therefore would last me longer
                Nintendo Switch Friend Code: SW-7009-7102-8818

                Comment

                • mgoblue
                  Go Wings!
                  • Jul 2002
                  • 25477

                  #23
                  Re: WoW professions

                  Originally posted by TCrouch
                  Keep in mind the Bronze Daggers still have 10.x DPS, and I can make those with far fewer rare components.
                  they both need tin, i've got the pearls, Strong flux I can buy, and aren't course grinding stones easy to make? I know there's not a big difference between the two though, you're right. I'm gonna see if I can buy any tin somewhere, because i'll need 12 (6 for each dagger), and that's a lot to ask you to mine...I'll get it somehow, i'm fine with my current daggers till I hit 18 anyways, so this is just planning. I'd rather have the pearl ones since they're a little better, therefore would last me longer
                  Nintendo Switch Friend Code: SW-7009-7102-8818

                  Comment

                  • TCrouch
                    MVP
                    • Jul 2002
                    • 4819

                    #24
                    Re: WoW professions

                    Coarse grinding stones require coarse stone (naturally)...not rough. I haven't seen a coarse stone yet either.

                    Comment

                    • TCrouch
                      MVP
                      • Jul 2002
                      • 4819

                      #25
                      Re: WoW professions

                      Coarse grinding stones require coarse stone (naturally)...not rough. I haven't seen a coarse stone yet either.

                      Comment

                      • fossen
                        Bl*bfl*th z*p!
                        • Jul 2002
                        • 7098

                        #26
                        Re: WoW professions

                        Tybalt is a Skinner/Leatherworker.

                        My skinning is well past 50, but the leatherworking is till low - low 30's.

                        I really want to make an Engineer. Don't even crae about a main class, just want an Engineer. I will probably make a Gnome Rogue Miner/Engineer.

                        Comment

                        • fossen
                          Bl*bfl*th z*p!
                          • Jul 2002
                          • 7098

                          #27
                          Re: WoW professions

                          Tybalt is a Skinner/Leatherworker.

                          My skinning is well past 50, but the leatherworking is till low - low 30's.

                          I really want to make an Engineer. Don't even crae about a main class, just want an Engineer. I will probably make a Gnome Rogue Miner/Engineer.

                          Comment

                          • injunwal
                            T*g*r's Sw*ng - M*ck*ls*n's M*n B**bs
                            • Jul 2002
                            • 2103

                            #28
                            Re: WoW professions

                            Originally posted by fossen
                            Tybalt is a Skinner/Leatherworker.

                            My skinning is well past 50, but the leatherworking is till low - low 30's.

                            I really want to make an Engineer. Don't even crae about a main class, just want an Engineer. I will probably make a Gnome Rogue Miner/Engineer.
                            Alright fossen, I had been waiting for someone to be an Engineer so they can make me some guns
                            Actually...believe it or not from my physique... I'm a light eater - Clay T. Shaver

                            Comment

                            • injunwal
                              T*g*r's Sw*ng - M*ck*ls*n's M*n B**bs
                              • Jul 2002
                              • 2103

                              #29
                              Re: WoW professions

                              Originally posted by fossen
                              Tybalt is a Skinner/Leatherworker.

                              My skinning is well past 50, but the leatherworking is till low - low 30's.

                              I really want to make an Engineer. Don't even crae about a main class, just want an Engineer. I will probably make a Gnome Rogue Miner/Engineer.
                              Alright fossen, I had been waiting for someone to be an Engineer so they can make me some guns
                              Actually...believe it or not from my physique... I'm a light eater - Clay T. Shaver

                              Comment

                              • mgoblue
                                Go Wings!
                                • Jul 2002
                                • 25477

                                #30
                                Re: WoW professions

                                Originally posted by TCrouch
                                Coarse grinding stones require coarse stone (naturally)...not rough. I haven't seen a coarse stone yet either.
                                yet another thing I'll search for lol...if i can't find 'em then the bronze ones will work.

                                Oh Fossen, rogues are pretty cool...you get a stealth ability around lvl 6, and you get stealth moves as time goes on. You can deal a ton of damage, but you're not as durable as a pally or warrior. The stealth picks up for that though, you can sneak up on a mob that's alone and get a lot of health down before he hits you.
                                Nintendo Switch Friend Code: SW-7009-7102-8818

                                Comment

                                Working...