Basics to making rosters/franchises?

Collapse

Recommended Videos

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • WWEDX2007
    Rookie
    • Jan 2015
    • 465

    #1

    Basics to making rosters/franchises?

    What are the basics to making ESPN NFL 2K5 rosters and franchises?

    I've been told before moving players in-game was bad (not on this forum but elsewhere) but then I found out that Finn's editor doesn't allow you to move players.

    Do you take retired players and change them into new players to keep the rosters current? for example, Peyton Manning is retired, but say there are no created player slots free, what's the course of action? change everything about him from photo to position to gear/looks and make him act as another player?

    Attributes are also a concern, the most recent rosters by cmew utilize Madden 16's attributes for the players, would that be the best option for stats (aside from judging them yourself?)

    Also, sliders, I've been told to play around with the game's sliders until I find it comfortable, but I feel sliders put together by longtime ESPN NFL 2K5 players are better, despite the fact that it's extremely challenging for me.

    I'd just like to figure this out because there are not many people keeping the game up to date, and if I could soak up the knowledge, I could keep the game alive by making my own rosters.
    Fandom:
    NHL - Vancouver Canucks (since 2011)
    NFL - Green Bay Packers (since 1998)
    NBA - Los Angeles Lakers (since 2004)
    MLB - New York Yankees (since 2004)
    NCAA - Michigan State Spartans (since 2004)
    UFL - Michigan Panthers (since 2023)
  • GillBoldberg
    MVP
    • Aug 2012
    • 1135

    #2
    Re: Basics to making rosters/franchises?

    I was actually thinking of making a "roster resource thread" for a while now for anyone who had similar questions to yours and wanted to get started on making rosters. I should probably get that started soon. A few sites that I use and a bunch of old community spreadsheets (as well as some of mine).

    Moving players in-game is perfectly fine.

    Changing retired players into current players like your example with Peyton is what I do.

    Madden ratings are a little high to fit perfectly into the 2K engine. Madden loves to overrate players physical attributes (speed, agility, strength & jumping) so you might want to tone them down if you do go the Madden ratings route.

    Comment

    • nemeckle
      Rookie
      • Jun 2015
      • 6

      #3
      Re: Basics to making rosters/franchises?

      Hey Everyone,
      I'm new to roster editing on ESPN NFL 2K5. I hadn't played the game for probably close to 10 years until I stumbled across it in a box in the basement. After finding it and my original xbox I played it for hours. I just couldn't put it down. I have done roster editing in Madden for sometime but decided to set that aside and try my hand at 2K5's roster editor. I am shocked at how easy the editor is to use compared to the one I use for Madden but I do have some questions specifically when it comes to ratings. My plan was to cross the ratings for Madden 18 when the spreadsheet comes out in early august. However I realized when digging through the 2K5 ratings that some of the rating either don't have or I had to guess on the equivalent Madden Rating. So I played with the Madden 17 spreadsheet to come up with a rating scale. I have what I did here. I put the ones I was really unsure about in bold text.
      2K5 rating - Madden 17 Rating
      Speed-Speed
      Agility-Agility
      Strength-Strength
      Jumping-Jumping
      Pass Accuracy-Average of the five accuracy ratings
      Pass Read Coverage-Average of pass accuracy and awareness
      Arm Strength-Arm Strength
      Scramble-Elusiveness (Not sure on this one ex. this gives Russell Wilson an 81 and Cam Newton and 87 while a less mobile Tom Brady a 30)
      Leadership-??????? I have no idea any suggestions would be appreciated
      Composure-Awareness?????
      Hold on to the Ball-Carrying
      Run Style-Will have to personalize based on other ratings
      Stamina-Stamina
      Durability-Injury
      Break Tackle-Trucking
      Catching-Average of the 3 catch ratings (This gives Jordy Nelson a 94 and OBJ a 95 with a lot of guys falling between 70 and 85)
      Run Block-Run Blocking
      Pass Block-Pass Blocking
      Run Routes-Average of Route Running and Release (Gives OBJ a 93 and a guy like Cordarrelle Patterson only a 67
      Run Coverage-Power Moves
      Pass Rush-Finesse Moves

      Tackle- Average of Tackle, play recognition, pursuit and hit power (Gives JJ Watt a 94 and Mack a 91)
      Coverage-Average of Press, man coverage, zone coverage and play recognition (Gives Sherman 92 and Rhodes a 88)
      Consistency-Awareness. I know I already used this once but I am not sure what else to use here either
      Aggressiveness-Toughness
      Kick Power-Kick Power
      Kick Accuracy-Kick Accuracy
      Before I spend a lot of time putting these ratings in does this look like it would work? If not or it appears good but I should tweak certain things I would love some input from experienced roster makers.I don't want to arbitrarily put ratings in for the ones that don't have an exact equivalent cause I am certain that will result in a terrible roster.

      Comment

      • GillBoldberg
        MVP
        • Aug 2012
        • 1135

        #4
        Re: Basics to making rosters/franchises?

        Scramble-Elusiveness (Not sure on this one ex. this gives Russell Wilson an 81 and Cam Newton and 87 while a less mobile Tom Brady a 30)
        QB's in 2K5 rarely ever actually scramble which was disappointing. The rating basically measures how accurate the QB is while outside of the pocket. I just used a scale for my rosters.
        90 - Elite scramblers (Wilson, Cam, Rodgers to an extent)
        50 - Balanced QB's
        10 - "Lead foot" QB's (Brady, Peyton, etc.)

        Leadership-??????? I have no idea any suggestions would be appreciated
        Composure-Awareness?????
        I used another scale here for Leadership, Composure and Consistency
        95 - Perennial All-Pro
        85 - Pro-Bowler
        75 - Solidified Starter
        65 - Replaceable Starter
        55 - Role Player/Bench
        45 - Late Round Rookies/Special Teamer

        Run Coverage-Power Moves
        Pass Rush-Finesse Moves
        Run Coverage - Average of Block Shed and Pursuit and maybe Tackle?
        Pass Rush - Average of Block Shed, Power and Finesse moves?


        Aggressiveness-Toughness
        Aggressiveness is the weirdest rating. I think the manual just says something about how often the player celebrates and bites on play action. But the one position group where it actually affects gameplay is DB's. If you set it too high DB's will do this weird circling ("360") animation before making a play on the ball or receiver. Basically, lower aggression = takes less chances, plays the receiver more than the ball. higher aggression = takes more risks by going for the int/swat. You can check out my thread here (page 25&26) where I discuss my aggression scale a little bit. It's ultimately up to you what you want to use. With DB's I'd probably not go over 50 for aggression.

        Comment

        • nemeckle
          Rookie
          • Jun 2015
          • 6

          #5
          Re: Basics to making rosters/franchises?

          Thanks this helps a lot. Let me ask one more question. In some versions of madden you can't take a edited roster into franchise mode. It just freezes up. Can you enter franchise mode with an edited roster on 2K5 or do you have to start a franchise then edit the roster?

          Comment

          • GillBoldberg
            MVP
            • Aug 2012
            • 1135

            #6
            Re: Basics to making rosters/franchises?

            With all my rosters I've created I've only had my franchise freeze once (sometimes you'll get some slow simulation but not a hard freeze). I just went to one of my backup files and it was working again. So there shouldn't be any problems with it. There are some small issues with franchise mode with a custom roster. Player stats won't clear from the previous season, so sometimes you'll get QB's with 10,000+ passing yards. This usually only happens during year 2-3 then it goes back to normal. There is a work around but it's touchy. The other issue is you'll sometimes have QB's become kick returners. This happens on the default roster too. You can use the editor to fix the depth charts but it is a bit annoying.

            Comment

            • nemeckle
              Rookie
              • Jun 2015
              • 6

              #7
              Re: Basics to making rosters/franchises?

              The last time I opened the editor it said that the Ravens have a not typical position kick returner. Would that be that issue? Is it possible to update the depth chart in the editor or in game only?

              Comment

              • Culture Rot
                MVP
                • Aug 2011
                • 3018

                #8
                Re: Basics to making rosters/franchises?

                Always happy to talk ratings. Lots of misconceptions about 2k ratings.

                Scrambling has nothing to do with elusiveness. Nothing. It controls how far and accurately the we throws the ball when on the run and doesn't set his feet. It has no effect on scrambling or sim stats.

                Aggressiveness controls risk taking at all positions a so as omeone mentioned for a defensive back it means going for swats and Ints

                I was also disappointed to find that many ratings do not matter. For example in 2k3 ( and imassuming 2k4), putting qb accuracy at 0 doesn't matter. He can still make all the throws any other QB can in game. It does effect sim stats. This can be tested in practice mode on any difficulty. there is this myth that 2k football has always had this incredible respect for the player ratings that was superior to maddens. Not the case. About half the ratings work as described. The rest are useless or a complete question mark.

                Putting the QB arm strength at 0 makes the QB do a slow wind up before throwing long. That's about it. 60-90 makes no difference. Every QB can throw for same yardage.

                Leadership gives an attribute boost to teammates ok same side of the ball. Higher the leadership the higher the boost.

                Composure in 2K and Awareness in Madden are not similar. Composure has to do with how well QB throws in the face of pressure and also how likely he is to take off running in face of pressure
                Last edited by Culture Rot; 07-19-2017, 06:07 PM.

                Comment

                • Delrickus
                  Rookie
                  • Oct 2017
                  • 8

                  #9
                  Re: Basics to making rosters/franchises?

                  Where do you get a scratch file for roster editing in Finns for the ps3. Trying to edit a 2018-2019 roster. Can’t edit a roster file that’s already been edited bc it says it’s a psv file. Help plsss!!

                  Comment

                  • Kevin82485
                    Rookie
                    • Aug 2005
                    • 177

                    #10
                    Re: Basics to making rosters/franchises?

                    Originally posted by Delrickus
                    Where do you get a scratch file for roster editing in Finns for the ps3. Trying to edit a 2018-2019 roster. Can’t edit a roster file that’s already been edited bc it says it’s a psv file. Help plsss!!
                    Not sure if you still need it, but you can get a roster file from here: http://nfl2k5rosters.com/2k5playstationrosters.html
                    Green Bay Packers
                    Milwaukee Brewers
                    Milwaukee Bucks
                    Wisconsin Badgers


                    XBL: TheJudge24
                    PSN: UntalentedTalent

                    Comment

                    • gino_454
                      Rookie
                      • Dec 2007
                      • 89

                      #11
                      Re: Basics to making rosters/franchises?

                      Originally posted by GillBoldberg
                      I was actually thinking of making a "roster resource thread" for a while now for anyone who had similar questions to yours and wanted to get started on making rosters. I should probably get that started soon. A few sites that I use and a bunch of old community spreadsheets (as well as some of mine).

                      Moving players in-game is perfectly fine.

                      Changing retired players into current players like your example with Peyton is what I do.

                      Madden ratings are a little high to fit perfectly into the 2K engine. Madden loves to overrate players physical attributes (speed, agility, strength & jumping) so you might want to tone them down if you do go the Madden ratings route.
                      When r u making a 2019 roster Gill??? I played ur rosters a few years back (2012) and they were really great. Id love to have a copy of a 2018-19 roster, if u make one will u post it here or on nfl2k5rosters? Thanks for ur past work and I hope u make one this year

                      Comment

                      • GillBoldberg
                        MVP
                        • Aug 2012
                        • 1135

                        #12
                        Re: Basics to making rosters/franchises?

                        Thanks Gino. I wish I had the time to commit to making a roster right now. I'll never say never but I guess we'll see what happens down the line? Sorry if that's vague haha. I know Big AL has his madden ratings roster available. So that should hold over some people. The tools and knowledge are out there for anyone to give roster creating a shot so I'd love to see other users keep 2K alive too.

                        Comment

                        • Fist Of Kings
                          Pro
                          • Oct 2009
                          • 793

                          #13
                          Re: Basics to making rosters/franchises?

                          Originally posted by gino_454
                          When r u making a 2019 roster Gill??? I played ur rosters a few years back (2012) and they were really great. Id love to have a copy of a 2018-19 roster, if u make one will u post it here or on nfl2k5rosters? Thanks for ur past work and I hope u make one this year

                          I didn't realize nfl2k5rosters was back up and running until I read your post, great news!

                          Comment

                          • merza462
                            Rookie
                            • Jan 2015
                            • 18

                            #14
                            Re: Basics to making rosters/franchises?

                            Hey Gill I was wondering if you are able to take a franchise file and convert it into just a roster file. I have been making roster edits throughout my season and forgot to save one with the edits with the season starting at the beginning haha.

                            Comment

                            • nchrist
                              Just started!
                              • Dec 2018
                              • 2

                              #15
                              Re: Basics to making rosters/franchises?

                              I'm unable to create post or produce PMs regarding that I'm new I'm assuming. So I'm here searching for answers.
                              I'm trying to import a roster into my existing franchise, using export 360 and OG xbox. I export the updated team roster and open up my franchise file in the editor and then import the the .2k5team file, I then hit save and it saves and says repacked. I then load the file to my memory card using xport 360. I connect memory card to Xbox and copy the save to it. All seems well except the updated team roster never reflects the changes I've made. Can anybody help me with the process of what I am doing wrong?
                              Thank you.

                              Comment

                              Working...