WIDTH, HEIGHT
Display resolution.
It is recommended to choose a display resolution with the same aspect ratio as your monitor.
The resolutions allowed may vary depending on which monitor you select.
For monitors with a 16:9 aspect ratio the recommended display resolution is:
1920 x 1080 for systems with 2 GB or more of VRAM.
1280 x 720 for systems with less than 2 GB of VRAM.
or the closest matching 16:9 resolution.
For monitors with a 16:10 aspect ratio the recommended display resolution is:
1920 x 1200 for systems with 2 GB or more of VRAM.
1280 x 800 for systems with less than 2 GB of VRAM.
or the closest matching 16:10 resolution.
REFRESHRATE
Monitor refresh rate. This game was designed for REFRESHRATE=60.
The refresh rates allowed may vary depending on which monitor you select.
For the best experience, please use REFRESHRATE=60, VSYNC=1 and BUFFERCOUNT=3.
Please use lower performance settings if 60 FPS cannot be maintained.
If 60 FPS still cannot be maintained, please use VSYNC=0 and BUFFERCOUNT=1.
BUFFERCOUNT
Number of queued display buffers.
For the best experience, please use REFRESHRATE=60, VSYNC=1 and BUFFERCOUNT=3.
Please use lower performance settings if 60 FPS cannot be maintained.
If 60 FPS still cannot be maintained, please use VSYNC=0 and BUFFERCOUNT=1.
VSYNC
Vertical refresh synchronization control.
VSYNC=0 - Do not synchronize to the REFRESHRATE.
VSYNC=1 - Synchronize frame rate to REFRESHRATE.
VSYNC=2 - Synchronize frame rate to half the REFRESHRATE.
VSYNC=3 or higher - Not recommended.
DYNAMIC_VSYNC
Control for dynamic VSYNC. Only valid when VSYNC=1
DYNAMIC_VSYNC=0 - Always use the specified VSYNC. Recommended for high-end graphics cards.
DYNAMIC_VSYNC=1 - Dynamically switch from VSYNC=1 to VSYNC=2 in non-interactive game cameras. Recommended for systems that run 60 FPS while playing the game, but cannot maintain 60 FPS in non-interactive parts.
LETTERBOX
Aspect ratio control. This game was designed for 16:9 aspect ratio.
LETTERBOX=0 - Assume 16:9 aspect ratio. No aspect ratio correction will be applied.
LETTERBOX=1 - Maintain 16:9 aspect ratio. The remainder of the display will be black.
CURSOR_IDLE_TIME
Number of seconds of mouse idle time before the cursor is hidden.
WINDOWMODE
WINDOWMODE=0 - Full-screen. Recommended for performance.
WINDOWMODE=1 - Windowed.
WINDOWMODE=2 - Full-screen Windowed. Recommended for responsive change of window focus (e.g. "Alt-Tab").
WINDOW_X, WINDOW_Y
Position of window when WINDOWMODE=1.
A window positioned outside the valid region for any monitor will be placed in center of the selected monitor.
MSAA
Hardware accelerated multi-sample anti-aliasing level control.
MSAA=0 or 1 - No multi-sample anti-aliasing. Recommended for low-end graphics cards or systems with less than 1 GB of VRAM.
MSAA=2 - 2 levels of multi-sample anti-aliasing.
MSAA=4 - 4 levels of multi-sample anti-aliasing. Recommended for systems with 1 GB of VRAM or more.
MSAA=8 - 8 levels of multi-sample anti-aliasing. Recommended for high-end graphics cards with 3 GB of VRAM or more.
MSAAQUALITY
Driver specific multi-sample anti-aliasing quality level setting.
The definition of a quality level is up to each hardware vendor to define. No facility is provided to us by Direct3D to help discover this information.
For more info, see "ID3D11Device::CheckMultisampleQualityLevels"
http://msdn.microsoft.com/en-us/libr...=vs.85%29.aspx
SUPERSAMPLE
Super-sample anti-aliasing levels. Can be combined with MSAA for higher anti-aliasing than provided in hardware.
SUPERSAMPLE=0 or 1 - No super-sample anti-aliasing. Recommended for systems with less than 4 GB of VRAM.
SUPERSAMPLE=2 - Render with double the WIDTH and HEIGHT resolution. Will take 4 times as much VRAM for render buffers!
SUPERSAMPLE=3 - Render with triple the WIDTH and HEIGHT resolution. Will take 9 times as much VRAM for render buffers!
SUPERSAMPLE=4 - Render with quadruple the WIDTH and HEIGHT resolution. Will take 16 times as much VRAM for render buffers!
SUPERSAMPLE=5 or higher - Not recommended. May cause driver crash and/or stalling.
MONITOR
Which display monitor to use. Use MONITOR=0 for the main monitor.
The resolutions allowed may vary depending on which monitor you select.
MAXANISOTROPY
Maximum number of texture anisotropic sampling levels allowed.
MAXANISOTROPY=1 - Recommended for low-end graphics cards.
MAXANISOTROPY=16 - Recommended for high-end and mid-range graphics cards.
TEXTURELOD
Texture resolution detail level control.
Use of high or medium resolution textures may increase load time,
and can cause large stalls when using a setting higher than recommended.
TEXTURELOD=0 - High resolution. Recommended for systems with 3 GB or more of VRAM.
TEXTURELOD=1 - Medium resolution. Recommended for systems with 2 GB or more of VRAM.
TEXTURELOD=2 - Low resolution. Recommended for systems with less than 2 GB of VRAM.
PLAYERLOD
Player mesh resolution detail level and cloth simulation control.
PLAYERLOD=0 - Cloth simulation enabled. Recommended for CPUs with 4 or more cores.
PLAYERLOD=0 - High resolution mesh detail. Recommended for high-end graphics cards.
PLAYERLOD=1 - Medium resolution mesh detail. Recommended for mid-range graphics cards.
PLAYERLOD=2 - Low resolution mesh detail. Recommended for low-end graphics cards.
CROWDLOD
Crowd mesh resolution detail level.
CROWDLOD=0 - High resolution mesh detail. Recommended for high-end graphics cards.
CROWDLOD=1 - Medium resolution mesh detail. Recommended for mid-range graphics cards.
CROWDLOD=2 - Low resolution mesh detail. Recommended for low-end graphics cards.
CROWDLOD=3 - No crowd.
EFFECTLOD
Special effects control.
EFFECTLOD=0 - Disable special effects. Recommended for low-end graphics cards. Shader model 4.0 or higher is required.
EFFECTLOD=1 - Enable special effects. Recommended for high-end and mid-range graphics cards. Shader model 4.1 or higher is required.
SHADERLOD
Shader detail control.
SHADERLOD=0 - High detail shaders. Recommended for high-end and mid-range graphics cards.
SHADERLOD=1 - Low detail shaders. Recommended for low-end graphics cards.
ABOVE_NORMAL_PRIORITY
Process priority control. This can also be set in the windows task manager.
ABOVE_NORMAL_PRIORITY=0 - Normal priority.
ABOVE_NORMAL_PRIORITY=1 - Above normal priority. Recommended for all systems.
ABOVE_NORMAL_PRIORITY=2 - High priority.
D3D_INTERNAL_THREADING_OPTIMIZATIONS
Control for internal D3D driver threading.
D3D_INTERNAL_THREADING_OPTIMIZATIONS=0 - Disallow multi-threaded graphics driver.
D3D_INTERNAL_THREADING_OPTIMIZATIONS=1 - Allow multi-threaded graphics driver. Recommended for all systems.
FAST_TEXTURE_FORMAT_CONVERSION
Texture format conversion control.
For more info, see "Format Conversion Using Direct3D 10.1"
http://msdn.microsoft.com/en-us/libr...px#Differences
FAST_TEXTURE_FORMAT_CONVERSION=0 - Use CPU for texture transfer after block compression. Recommended for driver stability. May cause stuttering on loading screens. Shader model 4.0 or higher is required.
FAST_TEXTURE_FORMAT_CONVERSION=1 - Use GPU for texture transfer after block compression. This is known to cause driver crash on some older graphics cards. Shader model 4.1 or higher is required.
DYNAMIC_ENVIRONMENT_MAP
Control for dynamic environment maps.
DYNAMIC_ENVIRONMENT_MAP=0 - Disable dynamic environment maps. Recommended for Intel integrated and older GPUs. Shader model 4.0 or higher is required.
DYNAMIC_ENVIRONMENT_MAP=1 - Enable dynamic environment maps. Recommended for newer AMD and NVIDIA GPUs. Shader model 4.1 or higher is required. Has been known to cause artifacts on older graphics cards.
JIT_SHADER_CREATE
Shader creation control
JIT_SHADER_CREATE=0 - Create shaders on file load. May cause stuttering on loading screens.
JIT_SHADER_CREATE=1 - Create shaders on first draw. May improve load time at the cost of in-game stuttering.
ADAPTER
Which graphics adapter to use on systems with more than one graphics card.
Only graphics cards connected to a monitor are recognized.
10-21-2014, 09:09 PM
Need a patch to prevent that 
