Fielding meter

[kooch66]

For the fielding meter underfoot (the blue arrows) does charging it higher increase error odds as well as increase power? Meaning on routine infield plays where you have time should you NOT charge it all the way to reduce the risk of error and only use it when you need full power?

Also, is there such thing as going past the full blue arrows? Meaning would you want to let go as soon as all the arrows are full or is full just full regardless if you continue to hold it?

[countryboy]

Re: Fielding meter

For the fielding meter underfoot (the blue arrows) does charging it higher increase error odds as well as increase power? Meaning on routine infield plays where you have time should you NOT charge it all the way to reduce the risk of error and only use it when you need full power?

Yes, 3 arrows seems to be a "normal" throw, whereas letting it go to 4 or 5 significantly increases the chances of an error. Think of it as a throw strength meter. The harder you try to throw the ball, the more likely it becomes that the throw is offline/errant.

Also, is there such thing as going past the full blue arrows? Meaning would you want to let go as soon as all the arrows are full or is full just full regardless if you continue to hold it?

I am not 100% sure about this but I believe it just restarts. In other words, if you hold it past 5 arrows, it will start over again at one arrow.

Hope this helps.

[stevostl]

Re: Fielding meter

yeah I screwed up my fielding settings and I need to know what default is if anyone could tell me. thanks

I switched to button accuracy and also tried pure analog and switched a couple of things but now I want it all back to default and not sure what is the default settings

can someone tell me what it is for throwing default..

I know buttons is default

but as far as the meter options.. is it meter on and difficulty set to rookie?

Thanks

[nemesis04]

Re: Fielding meter

For the fielding meter underfoot (the blue arrows) does charging it higher increase error odds as well as increase power? Meaning on routine infield plays where you have time should you NOT charge it all the way to reduce the risk of error and only use it when you need full power?

Also, is there such thing as going past the full blue arrows? Meaning would you want to let go as soon as all the arrows are full or is full just full regardless if you continue to hold it?

Max throw strength (full meter) is an ingredient towards a potential throwing error. Player attributes, momentum, angle to the ball and your branch point together also contribute to the end result.

With that said I don't like the design change at all. It is seriously out of scale with everything. Also, at times I find it not pointing in the correct direction to where I am throwing the ball, not sure why it is doing that. Personally I liked it better directly under the player but I see why the change because it is easier to regulate throw strength. If anything I would rather see it radiate out, where the player was in the center of it.

[RunN1st]

Re: Fielding meter

I use button accuracy with "no meter" loving it because you end up focusing on the animation vs. the meter.

[Woodweaver]

Fielding meter

Max throw strength (full meter) is an ingredient towards a potential throwing error. Player attributes, momentum, angle to the ball and your branch point together also contribute to the end result.



With that said I don't like the design change at all. It is seriously out of scale with everything. Also, at times I find it not pointing in the correct direction to where I am throwing the ball, not sure why it is doing that. Personally I liked it better directly under the player but I see why the change because it is easier to regulate throw strength. If anything I would rather see it radiate out, where the player was in the center of it.

The new design is an attempt to unify the meters into a single interface while trying to get a sleeker, updated look. There was a lot of back and forth internally, and this is just the first iteration.

As far as the direction of the chevrons, I am afraid that it was not clearly explained anywhere. So, here it is:

Originally, the player marker was always aligned with the camera meaning "down" or home was toward the camera, wherever it may be during a play, for all meters. This is only true for the analog meter now since the stick movements are still fixed with home plate being down. The button interfaces now have the power chevrons point to the base you are targeting. The reasoning being that it will give the player a better feel as to where the ball will be going relative to the fielder's current position regardless of the camera's position/angle.

As I said, this is an initial iteration which we will be looking to refine the mechanics as well as the look. Feedback is always appreciated.

Hope everyone is having fun with this year's offering.

[RunN1st]

Re: Fielding meter

The fielders this year have a much better sense of urgency on plays that you expect. Thanks for the awesome fielding.

One question: I assume rating impact how well/poor fielders lock on to the catch area.. correct? If so, which rating impacts that?

[Woodweaver]

Re: Fielding meter

The fielders this year have a much better sense of urgency on plays that you expect. Thanks for the awesome fielding.

One question: I assume rating impact how well/poor fielders lock on to the catch area.. correct? If so, which rating impacts that?

What do you mean by "lock on to the catch area"? Are you referring to a fielder attempting to catch a fly ball.

[nemesis04]

Re: Fielding meter

The new design is an attempt to unify the meters into a single interface while trying to get a sleeker, updated look. There was a lot of back and forth internally, and this is just the first iteration.

As far as the direction of the chevrons, I am afraid that it was not clearly explained anywhere. So, here it is:

Originally, the player marker was always aligned with the camera meaning "down" or home was toward the camera wherever it may be during play for all meters. This is only true for the analog meter now since the stick movements are still fixed with home plate being down. The button interfaces now have the power chevrons point to the base you are targeting. The reasoning being that it will give the player a better feel as to where the ball will be going relative to the fielder's current position regardless of the camera's position/angle.

As I said, this is an initial iteration which we will be looking to refine the mechanics as well as the look. Feedback is always appreciated.

Hope everyone is having fun with this year's offering.

Thank you for the explanation on the direction aspect, I use analog and was not really understanding what it was doing. Fielding overall is fantastic this year and great work with the snap throws. We have had quite a few discussions about it in the past.

[Woodweaver]

Fielding meter

Thank you for the explanation on the direction aspect, I use analog and was not really understanding what it was doing. Fielding overall is fantastic this year and great work with the snap throws. We have had quite a few discussions about it in the past.

Glad to hear it!

Getting those back picks to work was a project. We eventually just had to capture new animations for every aspect of this play to get them working properly. I still have some more I'd like to do with it...

[nemesis04]

Re: Fielding meter

Glad to hear it!

Getting those back picks to work was a project. We eventually just had to capture new animations for every aspect of this play to get them working properly. I still have some more I'd like to do with it...

The effort put into it really shows, feels great! Thanks again!

[sandmac]

Re: Fielding meter

Still confused. Is analog camera relative or not?


Sent from my iPhone using Tapatalk

[Ghost Of The Year]

Re: Fielding meter

Still confused. Is analog camera relative or not?


Sent from my iPhone using Tapatalk

... the player marker was always aligned with the camera meaning "down" or home was toward the camera, wherever it may be during a play, for all meters. This is only true for the analog meter now since the stick movements are still fixed with home plate being down.

___________________________________

[RunN1st]

Re: Fielding meter

What do you mean by "lock on to the catch area"? Are you referring to a fielder attempting to catch a fly ball.

Yes, sir. Seems that some players lock onto the catch area easier than others.

[Woodweaver]

Re: Fielding meter

Yes, sir. Seems that some players lock onto the catch area easier than others.

The fielding attribute affects how quickly the catcher region indicator appears, its initial size, and how much it will fluctuate while the ball is in the air. The "lock" will not happen until your fielder is close enough to the correct location with in the catch region to find/select a catch. The same attribute can also affect the set of catches available to your fielder for a given situation.